30 April 2021 in Physical Review Letters
For the first time it is experimentally demonstrated on the JET tokamak that a combination of a low impurity concentration bulk plasma and large magnetohydrodynamic instabilities is able to suppress relativistic electron beams without measurable heat loads onto the plasma facing components. Magnetohydrodynamic simulations of the instability and modeling of the postinstability plasma confirm the prompt loss of runaways and the absence of regeneration during the final current collapse. These surprising findings motivate a new approach to dissipate runaway electrons generated during tokamak plasma disruptions.
21 December 2021 in Nuclear Fusion
A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme.
14 October 2021 in Nuclear Fusion
12 October 2023 in Nuclear Fusion
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challenges arising from 37 MW of injected power in the ITER like wall environment, keeping the radiation in the edge and core controlled, avoiding MHD instabilities and reaching high neutron rates. The Deuterium hybrid plasmas have been re-run in Tritium and methods have been found to keep the radiation controlled but not at high fusion performance probably due to time constraints. For the first time this scenario has been run in Deuterium-Tritium (50:50). These plasmas were re-optimised to have a radiation-stable H-mode entry phase, good impurity control through edge Ti
gradient screening and optimised performance with fusion power exceeding 10 MW for longer than three alpha particle slow down times, 8.3 MW averaged over 5 s and fusion energy of 45.8 MJ.
25 August 2021 in Nuclear Fusion
12 October 2023 in Nuclear Fusion
The reference ion cyclotron resonance frequency (ICRF) heating schemes for ITER deuterium–tritium (D-T) plasmas at the full magnetic field of 5.3 T are second harmonic heating of T and 3He minority heating. The wave-particle resonance location for these schemes coincide and are central at a wave frequency of 53 MHz at 5.3 T. Experiments have been carried out in the second major D-T campaign (DTE2) at JET, and in its prior D campaigns, to integrate these ICRF scenarios in JET high-performance plasmas and to compare their performance with the commonly used hydrogen (H) minority heating. In 50:50 D:T plasmas, up to 35% and 5% larger fusion power and diamagnetic energy content, respectively, were obtained with second harmonic heating of T as compared to H minority heating at comparable total input powers and gas injection rates. The core ion temperature was up to 30% and 20% higher with second harmonic T and 3He minority heating, respectively, with respect to H minority heating. These are favourable results for the use of these scenarios in ITER and future fusion reactors. According to modelling, adding ICRF heating to neutral beam injection using D and T beams resulted in a 10%–20% increase of on-axis bulk ion heating in the D-T plasmas due to its localisation in the plasma core. Central power deposition was confirmed with the break-in-slope and fast Fourier transform analysis of ion and electron temperature in response to ICRF modulation. The tail temperature of fast ICRF-accelerated tritons, their enhancement of the fusion yield and time behaviour as measured by an upgraded magnetic proton recoil spectrometer and neutral particle analyser were found in agreement with theoretical predictions. No losses of ICRF-accelerated ions were observed by fast ion detectors, which was as expected given the high plasma density of n e ≈ 7–8 × 1019 m−3 in the main heating phase that limited the formation of ICRF-accelerated fast ion tails. 3He was introduced in the machine by 3He gas injection, and the 3He concentration was measured by a high-resolution optical penning gauge in the sub-divertor region. The DTE2 experiments with 3He minority heating were carried with a low 3He concentration in the range of 2%–4% given the fact that the highest neutron rates with 3He minority heating in D plasmas were obtained at low 3He concentrations of ∼2%, which also coincided with the highest plasma diamagnetic energy content. In addition to 3He introduced by 3He gas injection, an intrinsic concentration of 3He of the order of 0.2%–0.4% was measured in D-T plasmas before 3He was introduced in the device, which is attributed to the radioactive decay of tritium to 3He. According to modelling, even such low intrinsic concentrations of 3He lead to significant changes in ICRF power partitioning during second harmonic heating of T due to absorption of up to 30% of the wave power by 3He.