Including faults as seismogenic sources in probabilistic seismic hazard assessments (PSHA) has turned into a common practice as knowledge of active faults is improving. Moreover, the occurrence of earthquakes in multi-fault ruptures has evidenced the need to understand faults as interacting systems rather than independent sources. We present a PSHA for the Southeastern Spain obtained by including the faults of a moderate seismicity region, the Eastern Betics Shear Zone (EBSZ) in SE Spain, as the main seismogenic sources in two separate source models, one considering background seismicity. In contrast with previous studies in Spain, earthquake occurrence of the EBSZ system is modeled considering different hypotheses of multi-fault ruptures at the whole fault system scale and weighted in a logic tree. We compare the hazard levels with those from an area source PSHA and a previous fault-based approach. The results show a clear control of the EBSZ faults in the seismic hazard for all return periods, increasing drastically the hazard levels in the regions close to the fault traces and influencing up to 20 km farther with respect to the area source PSHA. The seismic hazard is dependent on the fault slip rates as peak ground accelerations and territorial extension of the fault influence appear higher around the Alhama de Murcia and Carboneras faults, while lower slip rate faults (Palomares Fault) show minor contribution to the hazard. For the return period of 475 years and near-fault locations, our models are more consistent with the ground motion values reached in the 2011 Mw 5.2 Lorca event than the building code or national seismic hazard map, which suggest that our fault system-based model performs more accurate estimations for this return period. Fault data, mainly slip rates, and its uncertainties have a clear impact on the seismic hazard and, for some faults, the lack of detailed paleoseismic studies can compromise the reliability of the hazard estimations. This, together with epistemic uncertainties concerning the background seismicity, are key discussion points in the present study, having an impact on further research and aiming to serve as a case example for other low-to-moderate seismicity regions worldwide.
Fault slip rate is one of the most crucial parameters to characterize earthquake occurrence in fault‐based seismic hazard assessments (SHA). Accordingly, paleoseismic studies have increasingly focused on constraining this parameter in active faults worldwide. We present a comprehensive paleoseismic study in the Alhama de Murcia Fault (AMF), one of the most active faults in SE Spain and source of destructing earthquakes such as the 2011 Mw 5.2 Lorca event. Contrasting with previous studies, we integrate paleoseismic data from four fault strands in the AMF and, based on trench slip analysis and numerical dates, we derive slip rate estimates of each strand over the whole transect and assess their time variability. The AMF has a minimum net slip rate between 1.35+0.16/−0.10 and 1.64+0.16/−0.11 mm/yr for the past 18 ± 1 to 15.2 ± 1.1 ka. These results prove the importance of accounting for the complete sections of a geological structure as they are almost twice the previous estimates for a single fault branch. Slip rate variability is identified in the AMF, with cyclic acceleration‐quiescence patterns that could be related to stress field changes driven by fault interaction or synchronicity with neighboring faults (e.g., Carrascoy). We hope that the data presented here motivates their inclusion into forthcoming fault‐based SHAs. In this regard, limitations related to the lack of paleoseismic data for one fault strand, along with poor characterization of the strike component of slip and insufficient age control of the units for another strand are highlighted and need to be accounted for by modelers.
19 December 2023 in Geoscientific Model Development
A key challenge in paleoseismology is constraining the timing and occurrence of past earthquakes to create an earthquake history along faults that can be used for testing or building fault-based seismic hazard assessments. We present a new methodological approach and accompanying code (Paleoseismic EArthquake CHronologies, PEACH) to meet this challenge. By using the integration of multi-site paleoseismic records through probabilistic modeling of the event times and an unconditioned correlation, PEACH improves the objectivity of constraining paleoearthquake chronologies along faults, including highly populated records and poorly dated events. Our approach reduces uncertainties in event times and allows increased resolution of the trench records. By extension, the approach can potentially reduce the uncertainties in the estimation of parameters for seismic hazard assessment such as earthquake recurrence times and coefficient of variation. We test and discuss this methodology in two well-studied cases: the Paganica Fault in Italy and the Wasatch Fault in the United States.
Physics-based earthquake simulators are an increasingly popular modeling tool in earthquake forecasting for seismic hazard as well as fault rupture behavior studies. Their popularity comes from their ability to overcome completeness limitations of real catalogs, and also because they allow reproducing complex fault rupture and interaction patterns via modeling the physical processes involved in earthquake nucleation and propagation. One important challenge of these models revolves around selecting the physical input parameters that will yield the better similarity to earthquake relationships observed in nature, for instance, the frictional parameters of the rate-and-state law—a and b—or the initial normal and shear stresses. Because of the scarcity of empirical data, such input parameters are often selected by trial–error exploration and predominantly manual model performance analyses, which can overall be time consuming. We present a new benchmarking approach to analyze and rank the relative performance of simultaneous earthquake simulation catalogs by quantitatively scoring their combined fit to three reference function types: (1) earthquake-scaling relationships, (2) the shape of the magnitude–frequency distributions, and (3) the rates of the surface ruptures from paleoseismology or paleoearthquake occurrences. The approach provides an effective and potentially more efficient approximation to easily identify the models and input parameter combinations that fit more closely to earthquake relations and behavior. The approach also facilitates the exhaustive analysis of many input parameter combinations, identifying systematic correlations between parameters and model outputs that can potentially improve the overall understanding of the physics-based models. Finally, we demonstrate how the method results agree with the published findings in other earthquake simulation evaluations, a fact that reinforces its overall usefulness. The model ranking outputs can be useful for subsequent analyses, particularly in seismic hazard applications, such as the selection of appropriate earthquake occurrence rate models and their weighting for a logic tree.
28 June 2022 in Revista de la Sociedad Geológica de España
El 25 de agosto de 1804 un fuerte terremoto sacudió la región del Campo de Dalías (Almería) llegando a sentirse con una intensidad EMS de IX (Mw ~6,4). En este estudio se muestran evidencias que sugieren una relación entre este episodio sísmico y la falla de Llano del Águila. Se trata de una falla normal sub vertical de dirección NW-SE y paralela a la falla de Loma del Viento, situada a unos 3 km al sur. Para la caracterización de la falla de Llano del Águila se ha llevado a cabo una nueva interpretación geomorfológica de los depósitos aluviales cuaternarios que se ven atravesados por la traza de la falla a lo largo del área de estudio. Se han identificado cuatro generaciones de abanicos aluviales provenientes de la Sierra de Gádor, y dos secciones de falla a escala cartográfica (Cantera Este y Rambla de la Maleza). La interpretación geomorfológica se basa en el análisis de fotografías aéreas históricas. Debido a la intensa antropización de la zona, los modelos digitales del terreno actuales no son útiles. Para solventar esta limitación se procesó un modelo digital de elevaciones mediante fotogrametría usando las fotos aéreas del vuelo interministerial (1977). El análisis de escarpes de falla mediante perfiles topográficos medidos en el nuevo modelo de elevaciones proporciona un salto vertical de 6,3 ± 1,9 m para la sección de la Cantera Este y de 12,1 ± 1,9 m para la sección de la Rambla de la Maleza. Estas interpretaciones han sido verificadas en el campo donde además se adquirieron nuevos datos sobre la cinemática de la falla. Todo ello ha permitido estimar la tasa de deslizamiento neta de cada sección: 0,016 ± 0,002 y 0,10 ± 0,02 mm/año para la sección de la Cantera Este y 0,031 ± 0,002 – 0,19 ± 0,.02 mm/año para la Rambla de la Maleza, respectivamente para los últimos 126 y 781 ka (Pleistoceno Medio). A partir de la longitud total de la traza de la falla se puede estimar mediante relaciones empíricas una magnitud máxima potencial de 6,59 ± 0,19.