In cable-driven parallel robots (CDPRs), rigid links are substituted by flexible cables. This change in actuation allows for a large workspace with a high payload to weight ratio, among other appealing characteristics. However, the accuracy for such systems needs to be improved to truly outperform classical parallel robots. A possible and not yet well studied solution is the use of vision-based control for CDPRs. This letter deals with the stability analysis of such a control scheme with regard to uncertainties lying both in the analytical models and the experimental setup. Two CDPRs are analyzed as illustrative examples. The results obtained show the system's robustness with respect to uncertainties.
9 January 2020 in IEEE Robotics and Automation Letters
Cable-driven parallel robots (CDPRs) are a kind of parallel robots that have cables instead of rigid links. Implementing vision-based control on CDPRs leads to a good final accuracy despite modeling errors and other perturbations in the system. However, unlike final accuracy, the trajectory to the goal can be affected by the perturbations in the system. This letter proposes the use of trajectory tracking to improve the robustness of 21/2D visual servoing control of CDPRs. Lyapunov stability analysis is performed and, as a result, a novel workspace, named control stability workspace, is defined. This workspace defines the set of moving-platform poses where the robot is able to execute its task while being stable. The improvement of robustness is clearly shown in experimental validation.
This letter focuses on the vibration reduction for Cable-Driven Parallel Robots. A Non-linear Model Predictive Controller (NMPC) is designed and implemented to adapt the control inputs sent to the robot actuators. This NMPC is based on an elasto-dynamic model of the robot, which is discretized and included in a constrained optimal control problem. Two experiments are conducted and the performance of the NMPC is compared with a Computed Torque Controller and a NMPC with an inelastic model. The first one is a trajectory following task and shows that the proposed controller significantly reduces the amplitude of the vibrations of the Moving-Platform along the trajectory and the second one focuses on a sudden braking situation and shows that the proposed control scheme manages to divide the amplitude of the post-braking oscillations by factors ranging from one and a half to twenty-two, demonstrating the interest of this controller for perturbation rejection.
Cable-Driven Parallel Robots (CDPRs) are a kind of parallel robots that have cables instead of rigid links. Implementing vision-based control on CDPRs leads to a good final accuracy despite modeling errors and other perturbations in the system. However, unlike final accuracy, the trajectory to the goal can be affected by the perturbations in the system. This paper proposes the use of trajectory tracking to improve the robustness of 2 1/2 D visual servoing control of CDPRs. Lyapunov stability analysis is performed and, as a result, a novel workspace, named control stability workspace, is defined. This workspace defines the set of moving-platform poses where the robot is able to execute its task while being stable. The improvement of robustness is clearly shown in experimental validation.