27 September 2021 in Archives of Control Sciences
The basic objective of the research is to construct a difference model of the melt motion. The existence of a solution to the problem is proven in the paper. It is also proven the convergence of the difference problem solution to the original problem solution of the melt motion. The Rothe method is implemented to study the Navier–Stokes equations, which provides the study of the boundary value problems correctness for a viscous incompressible flow both numerically and analytically.
10 June 2026 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Through a comparative analysis, this study investigates the development, simulation, and application of mathematical models for integrated analysis of copper rod production in order to improve product quality, reduce costs, and minimize risks. The purpose of this article is achieved by creating mathematical descriptions of real processes, which are then used to conduct computer experiments. In contrast to the traditional molecular dynamic methods, this study used information technology to obtain the characteristics of the flow field in technological equipment. The novelty lies in: integration of thermomechanical modeling with an optimization algorithm; introduction of a criterion minimizing mechanical property variation; consideration of reduction and redistribution effects on roll wear; possibility of adaptive real-time control. An information analysis of the profiles of copper melt flow velocities in a wide range of temperatures in the Copper Rod Production Plant Kazkat is presented. Information Technology fulfils the need to address the problem of determining the optimal values of temperature, rolling speed, and other parameters to achieve the best quality and productivity of copper rod production processes. Based on these findings, this study proposes the optimization directions for the temperature field profile in the rolling rolls, which leads to a decrease in roll wear and an increase in the uniformity of the wire rod structure, focusing on improving microstructural properties.
30 September 2026 in Science and Technology of Kazakhstan
The study aims to evaluate the effect of external and internal treatments on the crystallization of complex-alloyed steel and the resulting casting properties. Experiments were performed using 40KhN3MF steel subjected to magnetic-field treatment, mechanical vibration, and melt modification. The results demonstrated that electromagnetic treatment primarily affected the hardness of the cast material, whereas mechanical vibration contributed to changes in strength and structural refinement. A full factorial experimental design was used to establish quantitative relationships between the investigated processing factors and the resulting response. The reproducibility of the experimental data was verified using Cochran’s criterion, while the statistical significance of the regression coefficients was assessed using Student’s t-test. The adequacy of the obtained regression model was evaluated using Fisher’s criterion. Comparison of calculated and experimental values demonstrated satisfactory agreement within the investigated range of processing conditions. The results indicate that controlled external treatment during solidification can be used to modify the structural and mechanical characteristics of complex-alloyed steel castings and provide a basis for further optimization of casting conditions [8]. Crystallization, complex-alloyed steel, mechanical properties, magnetic treatment, mechanical vibration, melt modification, factorial experiment, regression analysis.