11 September 2017 in Meteoritics & Planetary Science
16 February 2018 in Meteoritics & Planetary Science
This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two‐stage light‐gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane‐driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high‐temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.
4 April 2017 in Meteoritics & Planetary Science
30 January 2017 in Meteoritics & Planetary Science
2 October 2017 in Meteoritics & Planetary Science
New insights into the kinematics of ejecta clouds and the dynamics of crater formation are gained from the introduction of an approach to track individual particles ejected from a horizontal hypervelocity impact of a 2 mm aluminum sphere at 6.3 km s−1 into vertically aligned Carrara marble. Particle trajectories are determined with 500 ns temporal resolution inside a 1–2 mm thick laser light sheet illuminating a single plane within the ejecta plume. In contrast to optical flow analysis, the methodology presented here enables us to track individual particles instead of relying on field‐averaged information. This is realized by correlating particles not via their geometric shape but through their trajectory directly. It robustly identifies even partially obscured or strongly tumbling particles, allowing for a comprehensive physical description of the highly dynamical excavation process based on the precise determination of position, time, and ejection velocity of each individual particle. Specifically, we find ejecta particles launched in a short window of about 0–25 μs after impact and up to a radial distance of 10 mm from the impact location. During this time interval, the transient crater radius grows from 2 ± 1 mm to 6 ± 2 mm. Velocities between 70 m s−1 and 1 km s−1 are observed and reveal a substantial steepening of the ejecta curtain within 15 μs after the impact. We additionally determine the particle size and find a μ‐parameter of 0.6 for Carrara marble which is consistent with theoretical predictions for nonporous materials.
27 December 2017 in Meteoritics & Planetary Science
Shock‐induced recovery experiments were performed to investigate melt formation in porous sandstones in the low shock pressure regime between 2.5 and 17.5 GPa. The sandstone shocked at 2.5 and 5 GPa is characterized by pore closure, fracturing of quartz (Qtz), and compression and deformation of phyllosilicates; no melting was observed. At higher pressures, five different types of melts were generated around pores and alongside fractures in the sandstone. Melting of kaolinite (Kln), illite (Ill), and muscovite (Ms) starts at 7.5, 12, and 15 GPa, respectively. The larger the amount of water in these minerals (Kln ~14 wt%, Ill ~6–10 wt%, and Ms ~4 wt% H2O), the higher the shock compressibility and the lower the shock pressure required to induce melting. Vesicles in the almost dry silicate glasses attest to the loss of structural water during the short shock duration of the experiment. The compositions of the phyllosilicate‐based glasses are identical to the composition of the parental minerals or their mixtures. Thus, this study has demonstrated that phyllosilicates in shocked sandstone undergo congruent melting during shock loading. In experiments at 10 GPa and higher, iron melt from the driver plate was injected into the phyllosilicate melts. During this process, Fe is partitioned from the metal droplets into the surrounding silicate melts, which induced unmixing of silicate melts with different chemical properties (liquid immiscibility). At pressures between 7.5 and 15 GPa, a pure SiO2 glass was formed, which is located as short and thin bands within Qtz grains. These bands were shown to contain tiny crystals of experimentally generated stishovite.