21 September 2023 in Optics Express
Infrared (IR) thermal camouflage and management are deeply desirable in the field of military and astronomy. While IR compatible with laser camouflage technology is extensively studied to counter modern detection systems, most existing strategies for visible light camouflage focus on color matching, which is not suitable for scenarios requiring transparency. In this work, we propose an optically transparent metamaterial with multi-band compatible camouflage capability based on the inverse design. The metamaterial consists of Ag grating, Si3N4 dielectric spacer layer, Ag reflection layer, and Si3N4 anti-reflective layer. An ideal multi-band compatible spectrum is involved in the inverse design algorithm. Calculated results demonstrate high transmittance (T0.38-0.78µm = 0.70) in the visible region, low reflectance (R1.55µm = 0.01) in laser working wavelength, high reflectance (R3-5µm = 0.86 and R8-14µm = 0.92) in the dual-band atmospheric window, and high emissivity (ɛ5-8µm = 0.61) for the non-atmospheric window. The radiative heat flux in the detected band is 31W/m2 and 201W/m2 respectively. Furthermore, the incident and polarized insensitivity of the proposed metamaterial supports applicability for practical situations. This work, emphasizes an effective strategy for conducting optically transparent design with compatible IR-laser camouflage as well as radiative cooling properties by an automated design approach.
18 May 2023 in Optics Express
Blindly increasing the channels of the mode (de)multiplexer on the single-layer chip can cause the device structure to be too complex to optimize. The three-dimensional (3D) mode division multiplexing (MDM) technology is a potential solution to extend the data capacity of the photonic integrated circuit by assembling the simple devices in the 3D space. In our work, we propose a 16 × 16 3D MDM system with a compact footprint of about 100 µm × 5.0 µm × 3.7 µm. It can realize 256 mode routes by converting the fundamental transverse electric (TE0) modes in arbitrary input waveguides into the expected modes in arbitrary output waveguides. To illustrate its mode-routing principle, the TE0 mode is launched in one of the sixteen input waveguides, and converted into corresponding modes in four output waveguides. The simulated results indicate that the ILs and CTs of the 16 × 16 3D MDM system are less than 3.5 dB and lower than -14.2 dB at 1550 nm, respectively. In principle, the 3D design architecture can be scaled to realize arbitrary network complexity levels.
27 June 2024 in Optics Communications
10 October 2023 in Optics Express
In recent years, structural color has developed rapidly due to its distinct advantages, such as low loss, high spatial resolution and environmental friendliness. Various inverse design methods have been extensively investigated to efficiently design optical structures. However, the optimization method for the inverse design of structural color remains a formidable challenge. Traditional optimization approaches, such as genetic algorithms require time-consuming repetitions of structural simulations. Deep learning-assisted design necessitates prior simulations and large amounts of data, making it less efficient for systems with a small number of features. This study proposes a tensor completion algorithm capable of swiftly and accurately predicting missing datasets based on partially obtained datasets to assist in structural color design. Transforming the complex physical problem of structural color design into a spatial structure relationship problem linking geometric parameters and spectral data. The method utilizes tensor multilinear data analysis to effectively capture the complex relationships associated with geometric parameters and spectral data in higher-order data. Numerical and experimental results demonstrate that the algorithm exhibits high reliability in terms of speed and accuracy for diverse structures, datasets of varying sizes, and different materials, significantly enhancing design efficiency. The proposed algorithm offers a viable solution for inverse design problems involving complex physical systems, thereby introducing a novel approach to the design of photonic devices. Additionally, numerical experiments illustrate that the structural color of cruciform resonators with diamond can overcome the high loss issues observed in traditional dielectric materials within the blue wavelength region and enhance the corrosion resistance of the structure. We achieve a wide color gamut and a high-narrow reflection spectrum nearing 1 by this structure, and the theoretical analysis further verifies that diamond holds great promise in the realm of optics.