Phosphorus, one of the most abundant elements in the Earth (∼0.1%), has attracted much attention in the last five years since the rediscovery of two-dimensional (2D) black phosphorus (BP) in 2014. The successful scaling down of BP endows this ‘old material’ with new vitality, resulting from the intriguing semiconducting properties in the atomic scale limit, i.e. layer-dependent bandgap that covers from the visible light to mid-infrared light spectrum as well as hole-dominated ambipolar transport characteristics. Intensive research effort has been devoted to the fabrication, characterization, functionalization and application of BP and other phosphorus allotropes. In this review article, we summarize the fundamental properties and fabrication techniques of BP, with particular emphasis on the recent progress in molecular beam epitaxy growth of 2D phosphorus. Subsequently, we highlight recent progress in BP (opto)electronic device applications achieved via customized manipulation methods, such as interface, defect and bandgap engineering as well as forming Lego-like stacked heterostructures.
In this paper, high performance InGaN double channel (DC) high electron mobility transistors (HEMTs) are proposed and systematically investigated. Due to the coordination of double InGaN channels, a large maximum drain current density and a distinct double-hump feature of the transconductance and frequency performance are achieved. More importantly, it is revealed that the coupling effect between the two InGaN channels is much stronger than that of the conventional GaN DC HEMTs. This characteristic leads to a remarkable enhancement in the gate voltage swing, indicating the excellent linearity of the InGaN DC HEMTs at both dc and rf conditions. Benefiting from the enhanced electron confinement in InGaN channels, the fabricated HEMTs show a low off state drain leakage current of 0.26 μA/mm and a high on/off current ratio (Ion/Ioff) of 5.1 × 106. In addition, the desirable current collapse and breakdown characteristics are also obtained. This work convincingly demonstrates the great potential and practicality of the InGaN DC HEMTs for high power and high bandwidth applications.
An approach to reduce charge overpotentials of the aprotic Li–O2 batteries is demonstrated through the formation of Na-doped defective Li2O2 by adding Na+ cations into the electrolyte.