Multimodal locomotion capability is an emerging topic in robotics field, and various novel mobile robots have been developed to enable the maneuvering in both terrestrial and aerial domains. Among these hybrid robots, several state-of-the-art bipedal robots enable the complex walking motion which is interlaced with flying. These robots are also desired to have the manipulation ability; however, it is difficult for the current forms to keep stability with the joint motion in midair due to the centralized rotor arrangement. Therefore, in this work, we develop a novel air-ground quadruped robot called SPIDAR which is assisted by spherically vectorable rotors distributed in each link to enable both walking motion and transformable flight. First, we present a unique mechanical design for quadruped robot that enables terrestrial and aerial locomotion. We then reveal the modeling method for this hybrid robot platform, and further develop an integrated control strategy for both walking and flying with joint motion. Finally, we demonstrate the feasibility of the proposed hybrid quadruped robot by performing a seamless motion that involves static walking and subsequent flight. To the best of our knowledge, this work is the first to achieve a quadruped robot with multimodal locomotion capability.
Manipulation performance improvement is crucial for aerial robots. For aerial manipulators, the baselink position and attitude errors directly affect the precision at the end effector. To address this stability problem, fixed-body approaches such as perching on the environment using the rotor suction force are useful. Additionally, conventional arm-equipped multirotors, called rotor-concentrated manipulators, find it difficult to generate a large wrench at the end effector due to joint torque limitations. Using distributed rotors to each link, the thrust can support each link weight, decreasing the arm joints' torque. Based on this approach, rotor-distributed manipulators (RDMs) can increase feasible wrench and reachability of the end effector. This article introduces a minimal configuration of an RDM that can perch on surfaces, especially ceilings, using a part of their body. First, we design a minimal rotor-distributed arm considering the flight and end-effector performance. Second, a flight controller is proposed for this minimal RDM along with a perching controller adaptable for various types of aerial robots. Third, we propose a motion planning method based on inverse kinematics, considering specific constraints to the proposed RDMs, such as perching force. Finally, we evaluate flight and perching motions and confirm that the proposed manipulator can significantly improve the manipulation performance.
19 July 2023 in IEEE Robotics and Automation Letters
Humanoids are versatile robotic platforms owing to their limbs with multiple degrees of freedom. Although humanoids can walk like humans, they are relatively slow, and cannot run over large barriers. To address these limitations, we aim to achieve rapid terrestrial locomotion ability and simultaneously expand the locomotion domain to the air by utilizing thrust for propulsion. In this letter, we first describe an optimized construction method for a humanoid robot equipped with wheels and a flight unit to achieve these abilities. Then, we describe the integrated control framework of the proposed flying humanoid for each locomotion mode: aerial, legged, and wheeled locomotion. Finally, we achieved multimodal locomotion and aerial manipulation experiments using the proposed robot platform. To the best of our knowledge, this is the first time that a single humanoid has simultaneously achieved three different types of locomotion, including flight.
18 October 2024 in IEEE/ASME Transactions on Mechatronics
Modular self-reconfigurable robots (MSRRs) offer enhanced task flexibility by constructing various structures suitable for each task. However, conventional terrestrial MSRRs equipped with wheels face critical challenges, including limitations in the size of constructible structures and system robustness due to elevated wrench loads applied to each module. In this work, we introduce an aerial MSRR (A-MSRR) system named BEnding-moment-free self-reconfigurable Aerial roboT moduLE (BEATLE), capable of merging and separating in-flight. BEATLE can merge without applying wrench loads to adjacent modules, thereby expanding the scalability and robustness of conventional terrestrial MSRRs. In this article, we propose a system configuration for BEATLE, including mechanical design, a control framework for multiconnected flight, and a motion planner for reconfiguration motion. The design of a docking mechanism and housing structure aims to balance the durability of the constructed structure with ease of separation. Furthermore, the proposed flight control framework achieves stable multiconnected flight based on contact wrench control. Moreover, the proposed motion planner based on a finite state machine achieves precise and robust reconfiguration motion. We also introduce the actual implementation of the prototype and validate the robustness and scalability of the proposed system design through experiments and simulation studies.
State‐of‐the‐art aerial robots often prioritize maneuverability or manipulation capabilities, making it difficult to achieve both. The issue arises because aerial robots with agile mobility lack sufficient rotors for manipulation tasks, while those with manipulation ability are too large for agile mobility. To tackle this problem, a novel aerial robot unit named TRADY, tilted‐rotor‐equipped aerial robot with autonomous in‐flight assembly and disassembly capability, is introduced. The TRADY unit can self‐assemble/disassemble with another unit in mid‐air, adjusting the aircraft's control freedom by switching between under‐actuated and fully‐actuated control models. The system implementation involves a docking mechanism design, optimized rotor configuration, as well as a control system with the ability to switch between under‐actuated and fully‐actuated controllers. A proposed state transition method compensates for discrete changes during the controller switchover process. Also, a motion strategy for assembly/disassembly with hazardous condition recovery behavior is presented. Finally, through experiments, TRADY demonstrated a 90 % success rate in executing assembly/disassembly motions, and in the assembly state, it can utilize full‐pose tracking and generate over nine times the torque of a single unit. This is the first aerial robot developed to perform both assembly and disassembly while seamlessly transitioning between fully‐actuated and under‐actuated models.