This study described a facile and environmentally friendly method for preparing polyimide (PI) aerogels via a sol–gel process and freeze-drying without the use of organic solvents. The prepared PI aerogels showed excellent mechanical properties. Their compressive strength can reach 4 MPa, which was mainly due to the 3,3′,4,4′-biphenyl tetracarboxylic dianhydride (BPDA) and phenylenediamine (PDA) used in the synthesis of their fully aromatic backbone. The PI aerogels obtained here showed low bulk densities (0.098–0.143 g cm−3), low shrinkage (10%), high specific surface areas (334–389 m2 g−1) and high porosity (92%). In addition, the PI aerogels exhibited excellent thermal stability and thermal insulation properties. The onset decomposition temperature of the PI aerogel was up to 560 °C while the thermal conductivity at room temperature was 0.036–0.038 W m−1 K−1.
2 November 2023 in Polymers for Advanced Technologies
Herein, we report an easy-to-prepare polyamic acid salt (PAAS) hydrogel with multiple functionalities including rapid self-healing, stimuli-responsive properties, and conductivity. This study describes a method for synthesizing PAAS hydrogel in aqueous solution. Phenylenediamine and 3,3′,4,4′-biphenyltetracarboxylic dianhydride were used to prepare a hydrogel with a fully aromatic backbone via gradual polymerization. It is possible to use the gel in the field of biomaterials in the absence of organic solvents. The prepared hydrogel was characterized using Fourier-transform infrared spectroscopy and dynamic rheometry. The gel has good toughness and the storage modulus and tensile stress are, respectively, about 0.25 and 0.45 MPa. Our study may pave the way for the manufacture of PAAS hydrogel, which may promote the development of hydrogel materials.