1 May 2012 in KSCE Journal of Civil Engineering
The urbanization of an undeveloped area often shortens outflow travel time and increases peak discharge from the basin, thereby increasing the downstream flood frequency. Stormwater detention ponds are the most common measure to maintain the outflow from the post-developed basin to a flow similar to that under the pre-developed condition. The design criteria of stormwater detention ponds are to minimize construction cost while achieving the flood control purpose. The tedious and time-consuming, trial-and-error method is commonly used to determine the optimal size and location of the pond and outlet structure for a design storm period. In this study, a stochastic search algorithm, a Genetic Algorithm (GA), is used to optimize the detention pond design. The decision variables are the pond storage, and the pipe diameters and number of pipes for the service outlet. The flood control objective considered in this study is that the peak discharge in the post-developed condition does not exceed that under the pre-developed condition and that the maximum water level in the pond during the flood remains below the allowable water level. The proposed optimization algorithm method was applied to the real design of two detention ponds in South Korea, where it generated better design options comprising smaller pond storage and smaller outlet standpipe dimensions than those of the traditional trial-and-error method, and in a much shorter computational time. Therefore, the stochastic search algorithm, GA, can be successfully applied in the design of a stormwater detention basin to improve accuracy and convenience. The engineers can accordingly assess the development plan in terms of the potential basin disaster more efficiently than is possible when using the tedious computation method.
1 June 2014 in Journal of Hydrologic Engineering
The return period of a rainfall event is estimated by the frequency analysis for a given rainfall duration. Thus, it is possible to derive different return periods with different rainfall durations for a given rainfall event. The longest derived return period is generally cited to represent the rainfall event. However, it is not clear if the longest derived return period is a representative measure of the given rainfall event. In this study, as a solution for this problem, a bivariate frequency analysis was introduced. As a first step, annual maximum rainfall events were selected by applying a bivariate exponential distribution. As an application, a total of 1,534 rainfall events observed in Seoul, Korea, over the last 46 years were analyzed. The annual maximum rainfall event series were then analyzed by applying a bivariate logistic model. The results were also compared with those from a conventional univariate frequency analysis. The findings of this study are summarized as follows: (1) the biva...
1 January 2015 in Journal of Hydrology
1 February 2014 in Journal of Hydrologic Engineering
1 June 2013 in Journal of Hydrologic Engineering
This study proposed a methodology for quantifying the flood runoff reduction effect of storage facilities by curve number (CN). The runoff hydrographs for various rainfall durations and return periods were derived using the modified rational method. The effect of runoff reduction due to the introduction of storage facilities was then quantified by CN. The result derived was summarized in a graph showing the decrease in CN as an effect of the runoff reduction with respect to the rainfall duration, return period, runoff coefficient of the catchment, and size of the storage facility. The runoff reduction effect of a storage facility was able to be easily and directly estimated using the derived graph. The result derived was also found to be well matched with the previous study for three different sites.
20 January 2015 in Environmental Earth Sciences