1 May 2007 in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
The performance of modern wireless communication systems are strictly related to the adopted medium access mechanism. An effective one, based on the carrier sense multiple access with collision avoidance technique, is hereinafter investigated. In particular, the performance of a CSMA/CA-based wireless sensor network, designed for industrial monitoring and performing both cyclic polling and acyclic alarm management, are analyzed. Effects of in-channel interference are also studied. The aim of the paper is to gain, from practical experiments, results and guidelines useful for the measurement and optimization of CSMA/CA-based sensor network performance, when employed for industrial monitoring. In such direction, a suitable IEEE 802.15.4 wireless sensors' testbed has been deployed and an high layer protocol for industrial monitoring has been implemented. The results obtained from the experiments carried out are shown.
1 May 2007 in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
Coexistence issues between IEEE 802.11b (Wi-Fi) wireless communication networks and IEEE 802.15.4 wireless sensor networks (WSN), operating within the same 2.4 GHz ISM-band, are hereinafter assessed. In particular, meaningful experiments performed through a suitable testbed and a cross-layer measurement approach are presented. Such experiments are executed both at physical layer, through measurements of channel power and signal-to-interference ratio (SIR), and at network/transport layer, by means of packet loss ratio estimations. Different testbed configurations are analyzed, varying characteristics like packet rate, packet size, SIR, network topology and number of wireless nodes. The purpose of the work is to deduce from experiments practical information and guidelines showing how optimizing networks setup and mitigating coexistence problems in some real-life configurations. Practical details about testbed, test environment and performed experiments are provided in the paper.
3 September 2019 in IEEE Transactions on Electromagnetic Compatibility
This article addresses the use of the Thevenin equivalent model in the case of switching circuits. An augmented Thevenin model is proposed, based on a well-established augmented equivalent approach for the analysis of periodically switched linear networks. It can profitably be used to provide a time-invariant equivalent description of a switching network and to investigate on the harmonics behavior at any of its ports even upon the varying of one of its internal parameters. This makes the article interesting for harmonic analysis purposes as, for instance, in the analysis and troubleshooting of electromagnetic interference or in the monitoring of a system behavior through the assessment and analysis of some of its spectral components. The model has also the advantage to be simple in its implementation. The feasibility and potentiality of the method are verified via simulations and comparisons with the results obtained by applying the augmented equivalent approach to the case of a dc–dc Buck converter.