Wheat bran oil (WBO) has been reported to have an important content of bioactive compounds, such as tocopherols, alkylresorcinols, steryl ferulates and other phenolic compounds; however, its poor solubility in water systems restricts its applications in the food industry. This study is focussed on the formulation of oil-in-water (O/W) nanoemulsions of WBO in order to improve the bioaccessibility of its active compounds. The influences of oil concentration, surfactant type and concentration, and emulsification method, on the droplet size and stability of the nanoemulsions were investigated. Response surface methodology was used to optimise the conditions for preparing stable nanoemulsions with the minimum droplet size. The optimal nanoemulsion was obtained when 1% of WBO and 7.3% of a surfactant mixture of Span 80 (37.4%) and Tween 80 (62.6%) were emulsified in water by high intensity ultrasonication for 50s after pre-emulsification with a high speed blender during 5 min. The optimal nanoemulsion showed good stability over time and antioxidant and tyrosinase inhibitory activities, which make it suitable for use in food applications.
Currently, industry is requesting proven techniques that allow the use of encapsulated polyphenols, rather than free molecules, to improve their stability and bioavailability. Response surface methodology (RSM) was applied in this work to determine the optimal composition and operating conditions for preparation of water-in-oil-in-water (W/O/W) emulsions loaded with phenolic rich inner aqueous phase from olive mill wastewater. A rotor-stator mixer, an ultrasonic homogenizer and a microfluidizer processor were tested in this study as high-energy emulsification methods. Optimum results were obtained by means of microfluidizer with 148 MPa and seven cycles input levels yielding droplets of 105.3 ± 3.2 nm in average size and 0.233 ± 0.020 of polydispersity index. ζ-potential, chemical and physical stability of the optimal W/O/W emulsion were also evaluated after storage. No droplet size growth or changes in stability and ζ-potential were observed. Furthermore, a satisfactory level of phenolics retention (68.6%) and antioxidant activity (89.5%) after 35 days of storage at room temperature makes it suitable for application in the food industry.
In this study, we aimed to prepare stable water-in-oil (W/O) nanoemulsions loaded with a phenolic-rich aqueous phase from olive cake extract by applying the response surface methodology and using two methods: rotor-stator mixing and ultrasonic homogenization. The optimal nanoemulsion formulation was 7.4% (w/w) of olive cake extract as the dispersed phase, and 11.2% (w/w) of a surfactant mixture of polyglycerol polyricinoleate (97%) and Tween 80 (3%) in Miglyol oil as the continuous phase. Optimum results were obtained by ultrasonication for 15 min at 20% amplitude, yielding W/O nanoemulsion droplets of 104.9 ± 6.7 nm in diameter and with a polydispersity index (PDI) of 0.156 ± 0.085. Furthermore, an optimal nanoemulsion with a droplet size of 105.8 ± 10.3 nm and a PDI of 0.255 ± 0.045 was prepared using a rotor-stator mixer for 10.1 min at 20,000 rpm. High levels of retention of antioxidant activity (90.2%) and phenolics (83.1–87.2%) were reached after 30 days of storage at room temperature. Both W/O nanoemulsions showed good physical stability during this storage period.
1 September 2020 in Colloids and Surfaces A: Physicochemical and Engineering Aspects