In this work we apply the Dammann grating concept to generate an equal-intensity square array of Bessel quasi-free diffraction beams that diverge from a common center. We generate a binary phase mask that combines the axicon phase with the phase of a Dammann grating. The procedure can be extended to include vortex spiral phases that generate an array of optical pipes. Experimental results are provided by means of a twisted nematic liquid crystal display operating as a binary phase spatial light modulator.
Multiple internal reflection effects on the optical modulation of a commercial reflective parallel-aligned liquid-crystal on silicon (PAL-LCoS) spatial light modulator (SLM) are analyzed. The display is illuminated with different wavelengths and different angles of incidence. Non-negligible Fabry-Perot (FP) effect is observed due to the sandwiched LC layer structure. A simplified physical model that quantitatively accounts for the observed phenomena is proposed. It is shown how the expected pure phase modulation response is substantially modified in the following aspects: 1) a coupled amplitude modulation, 2) a non-linear behavior of the phase modulation, 3) some amount of unmodulated light, and 4) a reduction of the effective phase modulation as the angle of incidence increases. Finally, it is shown that multiple reflections can be useful since the effect of a displayed diffraction grating is doubled on a beam that is reflected twice through the LC layer, thus rendering gratings with doubled phase modulation depth.
We present a universal design and proof-of-concept of a tunable linear retarder of uniform wavelength response in a broad spectral range. It consists of two half-wave retarders (HWR) between two quarter-wave retarders (QWRs), where the uniform retardance can be tuned continuously by simply rotating one of the HWRs. A proof-of-concept of this design is built by using commercially available Fresnel rhomb retarders that provide retardation with almost wavelength uniformity in the visible and near infrared from 450 to 1550 nm. The design is universal, since other achromatic QWRs and HWRs could also be employed. The system is experimentally demonstrated to control the state of polarization of a supercontinuum laser.
Optical pattern recognition under variations of illumination is an important issue. The sliced orthogonal nonlinear generalized (SONG) correlation has been proposed as an optical pattern recognition tool to discriminate with high efficiency between objects. But, at the same time, the SONG correlation is very sensitive to gray-scale image variations. In a previous work, we expanded the definition ofthe SONG correlation to the Weighted SONG (WSONG) correlation to modify the discrimination capability in a controlled way. Here, we propose to use the WSONG when pattern recognition is obtained by means of optical correlation under nonuniform illumination. The calculation of the WSONG correlation requires the summation of many linear correlations between binary images. To implement it optically, we use a time sequential joint transform correlator.
In this work we propose the use of twisted-nematic liquid-crystal spatial light modulators (TN-LC-SLM) as a useful tool for training students in the manipulation of light beams with phase-only masks. In particular, we focus the work on the realization of phase-only gratings and phase-only spiral phases for the generation of vortex beams, beams carrying orbital angular momentum (OAM). Despite the extensive activity in this field, its experimental implementation for educational purposes is limited because it requires the use of very expensive high-resolution liquid-crystal on silicon (LCOS) SLMs. Here, we show that a low-cost experimental implementation can be done with older TNLC technology. However, these devices, intended for display applications, exhibit rather limited optical phase modulation properties in comparison with modern LCOS devices, such as a very low range of phase modulation and a general coupled intensity modulation. However, we show that a precise characterization of their retardance parameters permits their operation in useful modulation configurations. As examples, we include one continuous phase-only configuration useful for reproducing the optimal triplicator phase grating, and a binary π -phase modulation. We include experiments with the realization of different phase diffraction gratings, and their combination with spiral phase patterns and lens functions to generate a variety of vortex beams.
Multiple-beam Fabry-Perot (FP) interferences occur in liquid crystal retarders (LCR) devoid of an antireflective coating. In this work, a highly accurate method to obtain the spectral retardance of such devices is presented. On the basis of a simple model of the LCR that includes FP effects and by using a voltage transfer function, we show how the FP features in the transmission spectrum can be used to accurately retrieve the ordinary and extraordinary spectral phase delays, and the voltage dependence of the latter. As a consequence, the modulation characteristics of the device are fully determined with high accuracy by means of a few off-state physical parameters which are wavelength-dependent, and a single voltage transfer function that is valid within the spectral range of characterization.