1 March 2025 in Applied Physics Letters
Amorphous oxide semiconductor thin-film transistors (TFTs) are widely used in display technology, yet balancing high mobility with illumination stability is challenging. In this article, we report a homojunction TFT based on Pr-doped In2O3 (InPrO), where the oxygen partial pressure is modulated to control device's mobility and stability significantly. Combining the characteristic of enhanced mobility at low oxygen partial pressure and the enhanced recombination role of Pr at high oxygen partial pressure, compatibility between high mobility and high illumination stability is achieved. This InPrO homojunction TFT exhibits excellent electrical characteristics, including a mobility of 50 cm2/Vs, a threshold voltage of 0.1 V, an Ion/off of 108, and a subthreshold swing of 0.1 V/dec. It also demonstrates enhanced stability, with threshold voltage shifts of −0.6 V for negative bias stress, 1.0 V for positive bias stress, and −0.9 V for negative bias illumination stress. This work provides a pathway for advancing AOS TFTs in transparent display technologies.
6 August 2026 in ACS Applied Electronic Materials
23 March 2026 in Applied Physics Letters
Understanding the metal/semiconductor contact is crucial for ultrathin oxide thin-film transistors (TFTs), where the interfacial region becomes comparable to the conductive channel. Here, we investigate three metal electrodes (Ti, Cu, and Al) interfaced with atomic layer-deposited 7 nm indium gallium oxide. X-ray photoelectron spectroscopy depth profiling and ultraviolet photoelectron spectroscopy analysis indicate that the contact behavior is predominantly governed by the reaction pathway and the reversibility of interfacial oxygen redox chemistry, rather than by work-function matching alone. Al undergoes rapid self-oxidation to form a dense Al2O3 barrier that suppresses diffusion and leads to large contact resistance. Ti follows a redox-driven pathway governed by its standard oxide formation enthalpy, which induces strong oxygen extraction and forms an In0-rich, highly conductive interfacial region yielding the highest mobility (74.9 cm2 V−1 s−1). In contrast, Cu drives substitutional solid-solution formation, achieving the lowest contact resistance (22.6 Ω cm) and best thermal stability. These results support a reaction-pathway-guided principle for the electrode selection in ultrathin oxide TFTs, revealing the dominant role of oxygen coordination chemistry in nanoscale contact engineering.