2 January 2025 in Nature Communications
Using metal oxides to disperse iridium (Ir) in the anode layer proves effective for lowering Ir loading in proton exchange membrane water electrolyzers (PEMWE). However, the reported low-Ir-based catalysts still suffer from unsatisfying electrolytic efficiency and durability under practical industrial working conditions, mainly due to insufficient catalytic activity and mass transport in the catalyst layer. Herein we report a class of porous heterogeneous nanosheet catalyst with abundant Ir-O-Mn bonds, achieving a notable mass activity of 4 A mgIr−1 for oxygen evolution reaction at an overpotential of 300 mV, which is 150.6 times higher than that of commercial IrO2. Ir-O-Mn bonds are unraveled to serve as efficient charge-transfer channels between in-situ electrochemically-formed IrOx clusters and MnOx matrix, fostering the generation and stabilization of highly active Ir3+ species. Notably, Ir/MnOx-based PEMWE demonstrates comparable performance under 10-fold lower Ir loading (0.2 mgIr cm−2), taking a low cell voltage of 1.63 V to deliver 1 A cm−2 for over 300 h, which positions it among the elite of low Ir-based PEMWEs.
23 March 2025 in Nature Communications
Proton exchange membrane fuel cells show great potential as power source for automobiles, yet are now facing technological challenges of low efficiency in the cathodic oxygen reduction reaction and severe degradation from Nafion ionomers. Herein, we report the design and construction of a core/shell nanoparticle, composing of Pt3Fe intermetallic nanoparticle as core and atomically-thin porous N-doped carbon layer as shell, to alleviate Nafion ionomer poisoning and local oxygen transport at the interfaces, thereby improving the performance of membrane electrode assemblies. Combining electrochemical, spectroscopic and calculation results verify that the sandwiching carbon layer can effectively prevent surface Pt active sites from poisoning by ionomers. Moreover, this deliberate design facilitates a more homogeneous distribution of ionomers in catalyst layer, and drives a H2-air fuel cell peak power density up to 1.0 W cm-2. Due to the configuration-induced strong Fe-N coordination, our unique catalyst efficiently preserves transition metals and consequently delivers a notable fuel cell durability at a constant potential of 0.5 V for 100 h.
3 December 2024 in Nature Synthesis
2 January 2025 in Nature Communications
Superbugs in groundwater are posing severe health risks through waterborne pathways. An emerging approach for green disinfection lies at photocatalysis, which levers the locally generated superoxide radical (·O2−) for neutralization. However, the spin-forbidden feature of O2 hinders the photocatalytic generation of active ·O2−, and thus greatly limited the disinfection efficiency, especially for real groundwater with a low dissolved oxygen (DO) concentration. Herein, we report a class of strained Mo4/3B2-xTz MBene (MB) with enhanced adsorption/activation of molecular O2 for photocatalytic disinfection, and find the strain induced spin polarization of In2S3/Mo4/3B2-xTz (IS/MB) can facilitate the spin-orbit hybridization of Mo sites and O2 to overcome the spin-forbidden of O2, which results in a 16.59-fold increase in ·O2− photocatalytic production in low DO condition (2.46 mg L-1). In particular, we demonstrate an In2S3/Mo4/3B2-xTz (50 mg)-based continuous-flow-disinfection system stably operates over 62 h and collects 37.2 L bacteria-free groundwater, which represents state-of-the-art photodisinfection materials for groundwater disinfection. Most importantly, the disinfection capacity of the continuous-flow-disinfection system is 25 times higher than that of commercial sodium hypochlorite (NaOCl), suggesting the practical potential for groundwater purification.
30 May 2025 in Science Advances
The escalating plastic crisis can be mitigated by upgrading waste polyethylene terephthalate (PET). Leveraging the geographical advantages of offshores with established chlor-alkali industries, abundant renewable energy, and extensive seawater, we here present a technically and economically viable strategy of harnessing natural seawater as a medium to transform PET plastics into high-value chemicals. We report a nickel-molybdenum catalyst incorporating frustrated Lewis pairs for the efficient breakage of C─C bond and the oxidation of ethylene glycol, which sustains a current of 6 amperes at 1.74 volts over 350 hours, with a projected revenue of approximately $304 United States dollar (USD) per ton of processed PET plastics. In a customized electrolyzer, we successfully convert 301.0 grams of waste PET into 227.1 grams of p-phthalic acid (95.5% yield), 1486.2 grams of potassium diformate (67.2% yield), and approximately 214.9 liters of green hydrogen. This study paves the way for scalable PET upcycling, contributing to a circular economy and mitigating the plastic pollution crisis.
11 December 2025 in Nature Communications
Precise manipulation of interfacial microenvironments within the electrical double layer remains a fundamental challenge, primarily due to dynamic structural rearrangements and competitive adsorption processes during reactions. Here, we employ nanoscale curvature engineering to construct three RuIr-based electrocatalysts with precisely controlled surface curvatures, establishing a direct correlation between geometric effects and hydrogen oxidation reaction efficiency. Finite-element simulations coupled with electrochemical analysis reveal that concave nanocage (CNC) morphology enhances localized electric field, simultaneously weakening adsorbed hydrogen (Hads) binding and promoting its subsequent cooperative oxidation with more OHads. Operando spectroscopy and ab initio molecular dynamics simulations demonstrate that high-curvature RuIr CNC drives ordered O-down H2O alignment at the electrode-electrolyte interface, strengthening hydrogen-bond networks and accelerating proton-coupled electron transfer kinetics. The optimized RuIr CNCs achieve a mass activity of 7.51 mA μg−1 (three-electrode system) and enable a peak power density of 1.52 W cm−2 (H2/O2 anion-exchange membrane fuel cell), with stability over 150 hours.