Harmeet Singh

Harmeet Singh

Auto-generated profile, based on publicly available information

Harmeet Singh

Lam Research Corporation 2 , 4650 Cushing Parkway, Fremont, California 94538

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 November 2024 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
PDF file
TLThorsten Lill
Thorsten Lill
MWMingmei Wang
Mingmei Wang
DWDongjun Wu
Dongjun Wu
YOYoun-Jin Oh
Youn-Jin Oh
TKTae Won Kim
Tae Won Kim
IKIgor D. Kaganovich
Igor D. Kaganovich
Etching of high aspect ratio features into alternating SiO2 and SiN layers is an enabling technology for the manufacturing of 3D NAND flash memories. In this paper, we study a low-temperature or cryo plasma etch process, which utilizes HF gas together with other gas additives. Compared with a low-temperature process that uses separate fluorine and hydrogen gases, the etching rate of the SiO2/SiN stack doubles. Both materials etch faster with this so-called second generation cryo etch process. Pure HF plasma enhances the SiN etching rate, while SiO2 requires an additional fluorine source such as PF3 to etch meaningfully. The insertion of H2O plasma steps into the second generation cryo etch process boosts the SiN etching rate by a factor of 2.4, while SiO2 etches only 1.3 times faster. We observe a rate enhancing effect of H2O coadsorption in thermal etching experiments of SiN with HF. Ammonium fluorosilicate (AFS) plays a salient role in etching of SiN with HF with and without plasma. AFS appears weakened in the presence of H2O. Density functional theory calculations confirm the reduction of the bonding energy when NH4F in AFS is replaced by H2O.

1 December 2025 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
XWXue Wang
Xue Wang
THTanzid Hossain
Tanzid Hossain
PKPrabhat Kumar
Prabhat Kumar
TLThorsten Lill
Thorsten Lill
MWMingmei Wang
Mingmei Wang
SASumit Agarwal
Sumit Agarwal
During reactive ion etching of SiNx in fluorine-based plasmas where HF is produced through a combination of gas-phase and surface reactions, ammonium fluorosilicate (AFS) has been reported to form on the SiNx surface. However, the underlying mechanism for AFS formation and its role in SiNx etching is still unclear, particularly during etching under energetic ion bombardment. In this work, using in situ attenuated total reflection Fourier-transform infrared spectroscopy, we show that during SiNx etching with a CH2F2/Ar plasma, when the substrate was at room temperature at a bias voltage of −240 V, an etch stop occurred with the simultaneous accumulation of graphitic hydrofluorocarbon and AFS on the SiNx surface. Under nominally similar conditions in a CH2F2/Ar plasma, but with the substrate at 70 or 120 °C, no etch stop was observed along with the absence of hydrofluorocarbon and AFS. By eliminating the formation of a graphitic hydrofluorocarbon layer in a SF6/H2 plasma, also at a bias voltage of −240 V, we reveal that AFS accumulation does not necessarily lead to an etch stop, and a steady-state thickness of AFS appears on surface as a result of a balance between AFS formation due to SiNx etching and AFS decomposition due to the impingement of energetic ions and H radicals. The effect of the substrate bias voltage on the etch behavior and surface composition was also studied in CH2F2/Ar and SF6/H2 plasmas. Our results show that the AFS is likely mixed with the underlying SiNx film under energetic ion bombardment instead of being present as a well-defined uniform layer. As a result, the presence of AFS does not necessarily lead to an etch stop. AFS formed on the SiNx surface decomposed when exposed to H radicals generated in H2 plasma under self-bias. Therefore, we conclude that the H radicals can play a dual role where they facilitate AFS formation by scavenging F radicals to form HF, but can also directly remove AFS formed on the surface. Finally, the slow removal of AFS by increasing the temperature to 70 °C suggests that AFS accumulation can be controlled with the substrate temperature.

1 March 2026 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
WSWallis E. Scholl
Wallis E. Scholl
MWMingmei Wang
Mingmei Wang
TLThorsten Lill
Thorsten Lill
HSHarmeet Singh
Harmeet Singh
SASumit Agarwal
Sumit Agarwal
In molecular layer deposition (MLD), the growth per cycle (GPC) depends on process conditions with no well-defined temperature window. During MLD of polyurea using toluene diisocyanate (TDIC) and ethylendiamine (ED) as MLD precursors, the GPC decreased with deposition temperature from 0.22 nm at 0 °C to 0.022 nm at 45 °C. While we observed the reaction of toluene diisocyanate with the underlying SiO2 at 45 °C, at 22 °C, in situ infrared spectroscopy indicates that the MLD film is not anchored to the substrate via covalent bonds. TDIC and ED displayed different temperature-dependent interactions with the growing polyurea film during MLD. Specifically, at lower temperatures, ED was more likely to be added to the film via physisorption, and as a consequence, TDIC was more likely to double react with both its functional groups to –NH2 sites within the film. While the lower GPC at higher temperature is driven predominantly by a decrease in ED physisorption, the rate of TDIC double reaction must also decrease due to the lower density of available reactive sites. As a result, at higher temperatures, both ED physisorption and TDIC double reactions are suppressed, and the ratio of polyurea linkages formed in each half-cycle was closer to unity. While the GPC was the highest at 0 °C, we also show that the films deposited at a lower temperature were unstable in both vacuum and the ambient and showed up to ∼15% decrease in thickness, most likely due to the desorption of physisorbed precursor molecules.

9 April 2026 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
YFYichen Fan
Yichen Fan
TLThorsten Lill
Thorsten Lill
MWMingmei Wang
Mingmei Wang
DWDongjun Wu
Dongjun Wu
GIGopal Iyer
Gopal Iyer
HSHarmeet Singh
Harmeet Singh
Vertical scaling of 3D NAND devices calls for higher SiO2 and SiN etching rates and meaningful reduction of aspect ratio dependent etching. Recently, evolutionary improvements of the fluorocarbon gas process have been replaced by novel so-called cryo etching processes using HF as the main etch gas. In this paper, we report computational results for the activation Gibbs free energies ΔG‡ for the reaction of HF and various additive gases with SiO2 and SiN. The results are compared with available experimental trends. We find that the dipole moment of the additive gas is an indicator of its catalytic effect.

29 July 2026 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
XWXue Wang
Xue Wang
MHMd Tanzid Hossain
Md Tanzid Hossain
PKPrabhat Kumar
Prabhat Kumar
TLThorsten Lill
Thorsten Lill
MWMingmei Wang
Mingmei Wang
SASumit Agarwal
Sumit Agarwal
We have designed and fabricated a two-stage differentially pumped setup for a quadrupole mass spectrometer to identify stable etch products generated during etching of SiNx in an HF plasma under an applied bias voltage of −240 V to the substrate. In this setup, the etch products can be directly collected into a sampling cone with a 1 mm aperture at a distance of ∼3 mm from the sample surface, which is shorter than the mean free path in the HF plasma at 10 mTorr. We show that SiF4 is the primary Si-containing etch product. It is unlikely that SiF2 is an etch product during SiNx etching at the conditions employed in this study. We also detected small fractions of SiH2F2 and SiHF3 released from the SiNx surface during etching. Since the electron impact ionization cross sections for SiH2F2 and SiHF3 are not available in the literature, we could not estimate their relative abundance compared to SiF4. We were unable to conclusively detect NH3 as the primary N-containing etch product due to background H2O in the chamber, which has a cracking pattern that overlaps with NH3 at mass-to-charge ratios of 16 and 17.

16 October 2026 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
WSWallis E. Scholl
Wallis E. Scholl
XWXue Wang
Xue Wang
AKAndrew P. Kaye
Andrew P. Kaye
MWMingmei Wang
Mingmei Wang
WZWenyu Zhang
Wenyu Zhang
SASumit Agarwal
Sumit Agarwal
Molecular layer deposition (MLD) was used to deposit polyurea films using toluene diisocyanate and ethylenediamine as precursors. Polyurea was deposited on SiO2 and SiNx blanket films and exposed to an HF plasma to evaluate plasma-surface interactions. The surface composition was monitored using in situ infrared spectroscopy. During the initial stages of HF plasma exposure, polyurea was sacrificially etched, while etching of the underlying SiO2 or SiNx films was negligible. Once polyurea was completely consumed by reactions with plasma species, the underlying SiO2 or SiNx films were etched at their baseline etch rates. Despite the high porosity of the MLD films, the presence of polyurea prevented etching of the underlying material, showing that polyurea efficiently consumed the reactive plasma species. Fluorination of polyurea was observed prior to its removal, suggesting that polyurea was removed as hydrofluorocarbons during HF plasma etching. Finally, polyurea was deposited on ∼65:1 aspect-ratio holes in SiO2-SiNx stacks and then exposed to an etching plasma to evaluate the sidewall passivation. We show that polyurea was deposited throughout the entire hole using the saturation doses for a flat surface, although the thickness on the sidewalls was lower than the planar surface. After MLD, in the second etch step, the polyurea film preserved the critical dimension throughout the high-aspect-ratio feature.