1 February 2025 in Physics of Fluids
Among the leading technologies for mine dust source control is coal seam water infusion. To address the negative impacts resulting from the hydrophobic nature of coal, researchers have put forward a novel concept of enhanced wetting through nano-silica suspensions. This research analyzed the influence pattern of nano-silicon dioxide on coal's adsorption of water through molecular dynamics simulation. The macroscopic contact angle experiments were then employed to verify the simulation findings, which finally revealed the wetting mechanism and the action law of nano-silica on coals of different coal rank. The findings indicate that the intermolecular interactions within the simulated system are governed by the electrostatic potential on the surface of each molecule. The silicon nanoparticles possess a broad range of electrostatic potential distribution. This affects the formation of intermolecular hydrogen bonds and thereby regulates the wettability. The wettability decreases as the degree of coal degradation increases. In the concentration range of 0 to 2.0 wt. % for nano-silica, the contact angle decreases as the concentration increases. After treating lignite (HM), bituminous coal (YM), and anthracite (WYM), the contact angles show reductions of 81.59%, 73.02%, and 60.85%, respectively, compared to the control group. The research findings can offer theoretical direction for choosing the concentration of nano-silica fluid in the process of coal seam water infusion.
1 February 2025 in Physics of Fluids
In order to investigate the mechanism of pore regulation on the wetting performance of coal-ionic liquids, the wetting performance and mechanism of coal-ionic liquids at different temperatures were analyzed based on the contact angle, surface tension, low-field nuclear magnetic resonance, and atomic force microscopy experiments. A method of comprehensively analyzing the wetting mechanism through pore structure and surface morphology was proposed. The findings demonstrated that the wetting properties of ionic liquids on coal showed temperature selectivity, with the ionic liquids containing Cl− preferring low temperatures and [BMIM][BF4] on the contrary. After treatment, the average pore diameter, average roughness, and porosity of coal samples increased by 0.34–18.36 nm, 2.09–9.7 nm, and 0.5929%–1.4313%, respectively, and the trend of pore parameter change aligns with the trend of wetting characteristic change. In addition, the fitting results revealed that the increase in roughness had a negative correlation with the contact angle's size and a positive correlation with the increase in porosity, indicating that ionic liquids can affect the wetting properties of coal by changing the pore structure and apparent morphology of the coal. The research results are significant in enhancing the mine dust management capability.