1 August 2019 in Nano Energy
KSKamyar Shirvanimoghaddam
+6
2 August 2019 in Science Advances
We have developed a method to solution process strongly hydrogen-bonded odd nylons into ferroelectric thin films.
29 October 2018 in ACS Applied Nano Materials
MAMoretza Hassanpour Amiri
+2
3 February 2020 in Macromolecular Chemistry and Physics
Among odd‐nylons, nylon‐5 exhibits the highest remanent polarization and is thus a desirable material for many applications of ferroelectric polymers. However, nylon‐5 has never been used as a ferroelectric material, because the synthesis of nylon‐5 and its processing into thin films are challenging. This work revisits the synthesis of nylon‐5 via anionic ring opening polymerization (AROP) and studies the effect of reaction time and scale‐up on (i) molecular weight (Mn), (ii) melting point (Tm), (iii) yield, and (iv) ferroelectric properties. For the first time, the molecular weight of nylon‐5 is characterized via size exclusion chromatography (SEC), nuclear magnetic resonance (NMR) spectroscopy, as well as matrix assisted laser desorption ionization time of flight mass spectroscopy (MALDI ToF‐MS), showing Mn values of up to 12 500 g mol‐1. Extended reaction times and the synthesis on a larger scale increase the molecular weight and yield. Nylon‐5 thin films are fabricated from a TFA:acetone (60:40 mol%) solvent mixture. Nylon‐5 thin‐film capacitors are ferroelectric and show a remanent polarization as high as 12.5 ± 0.5 μC cm‐2, which is stable in time. The high remanent polarization values, combined with the facile solution processing, render nylon‐5 a promising candidate for future microelectronic and multi‐ferroic applications.
25 February 2020 in Journal of Materials Chemistry C
MAMohammad Mahdi Abolhasani
Mohammad Mahdi Abolhasani
MAMorteza Hassanpour Amiri
Ultra-smooth thin-films of nylons, one of the most successful commercialized polymers, have been realized for the application in ferroelectric field effect transistors.
19 March 2018 in Applied Physics Letters
Organic bistable diodes based on phase-separated blends of ferroelectric and semiconducting polymers have emerged as promising candidates for non-volatile information storage for low-cost solution processable electronics. One of the bottlenecks impeding upscaling is stability and reliable operation of the array in air. Here, we present a memory array fabricated with an air-stable amine-based semiconducting polymer. Memory diode fabrication and full electrical characterizations were carried out in atmospheric conditions (23 °C and 45% relative humidity). The memory diodes showed on/off ratios greater than 100 and further exhibited robust and stable performance upon continuous write-read-erase-read cycles. Moreover, we demonstrate a 4-bit memory array that is free from cross-talk with a shelf-life of several months. Demonstration of the stability and reliable air operation further strengthens the feasibility of the resistance switching in ferroelectric memory diodes for low-cost applications.