Seungjoo Kim

Seungjoo Kim

Auto-generated profile, based on publicly available information

Seungjoo Kim

Korea Testing Certification, 22, Heungan-dearo 27, Gunpo-si 15809, Korea

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2019 in Energies
Verified
Journal Article
Open access
PDF file
HJHyeonmu Jang
Hyeonmu Jang
DKDongmyoung Kim
Dongmyoung Kim
YHYechan Hwang
Yechan Hwang
IPInsu Paek
Insu Paek
SKSeungjoo Kim
Seungjoo Kim
JBJoonho Baek
Joonho Baek
In this study, the performance of an Archimedes spiral wind turbine is analyzed by simulation and validated by a field test. It is characterized as a horizontal-axis drag-type wind turbine. This type of wind turbine cannot be analyzed by the well-known Blade Element Momentum(BEM) theory or Double Stream Tube Method(DSTM) commonly used to analyze the performance of lift-type wind turbines. Therefore, the computational fluid dynamics (CFD) method was applied. From the simulation, the power coefficient, known as the mechanical efficiency of the rotor, the tip speed ratio was obtained. The maximum power coefficient, and the corresponding tip speed ratio were found to be 0.293 and 2.19, respectively. In addition, the electrical efficiency with respect to the rotational speed of the generator was obtained through generator–controller test. The obtained mechanical and electrical efficiencies were used to predict the power curve of the wind turbine. Finally, the predicted performance of the wind turbine, including the electrical losses, was validated by the field test. The maximum error between the prediction and the measured power was found to be less than 7.80%.

7 May 2019 in Energies
Verified
Journal Article
Open access
PDF file
HJHyeonmu Jang
Hyeonmu Jang
IPInsu Paek
Insu Paek
SKSeungjoo Kim
Seungjoo Kim
DJDeockjin Jeong
Deockjin Jeong
In this study, an off-grid–type small wind turbine for street lighting was designed and analyzed. Its performance was predicted using a computational fluid dynamics model. The proposed wind turbine has two blades with a radius of 0.29 m and a height of 1.30 m. Ansys Fluent, a commercial computational fluid dynamics solver, was used to predict the performance, and the k-omega SST model was used as the turbulence model. The simulation result revealed a tip-speed ratio of 0.54 with a maximum power coefficient, or an aerodynamic rotor efficiency of 0.17. A wind turbine was installed at a measurement site to validate the simulation, and a performance test was used to measure the power production. To compare the simulation results obtained from the CFD simulation with the measured electrical power performance, the efficiencies of the generator and the controller were measured using a motor-generator testbed. Also, the control strategy of the controller was found from the field test and applied to the simulation results. Comparing the results of the numerical simulation with the experiment, the maximum power-production error at the same wind speed was found to be 4.32%.