1 January 2025 in Physics of Fluids
To reduce the adverse damage caused by cavitation phenomena to the hydraulic machinery, such as surface erosion of the equipment, increased mechanical vibration, and decreased service life, this review summarizes from the aspects of cavitation instability mechanisms, cavitation prediction methods, and cavitation suppression methods. In terms of cavitation flow instability mechanisms, two main mechanisms that affect the shedding of cloud cavitation, reentrant jet, and bubbly shock wave, were thoroughly summarized. It is pointed out that the shedding behavior of the cavity is greatly influenced by the thickness of the reentrant jet relative to the cavity, and the bubbly shock wave is also one of the important factors in cavitation vortex dynamics. In terms of cavitation prediction methods, a detailed comparison and analysis were made between the traditional cavitation prediction methods based on numerical simulation and the currently popular cavitation prediction methods based on neural networks. The former mainly includes cavitation models and turbulence models, while the latter mainly summarizes the application of chain physics-informed neural network, pressure–velocity network, long short-term memory, and other neural networks in cavitation prediction. It is pointed out that artificial intelligence predictive models have advantages in model order reduction and accurate prediction of cavitation flow field feature parameters. In terms of cavitation suppression methods, active and passive cavitation suppression methods were thoroughly summarized. Finally, based on the current research status of hydrofoil cavitation prediction methods and cavitation suppression methods, this article discusses and looks forward to the direction of development.
1 January 2024 in Physics of Fluids
To alleviate the negative impacts of cavitation phenomenon on hydrodynamic machinery, such as mechanical vibration and noise, a hydrofoil model is established based on the micro-wedge structure, and numerical simulation of the hydrofoil is carried out by using the modified turbulence model k–omega shear stress transport (SST k–ω) to analyze the lift coefficient of drag, pressure pulsation, cavitation volume fraction, cavitation volume morphology, and turbulent kinetic energy distribution, and to reveal the inhibition of cavitation mechanism of the chord direction of the placement and the height of the micro-wedge structure coupling. The results show that the height of the micro-wedge structure determined by the thickness of the boundary layer is an important parameter affecting the cavitation performance, and the micro-wedge structure with a smaller height will produce better cavitation suppression, and the height of 0.05 mm has the best suppression effect, and the suppression of the main frequency of pulsation and the amplitude of pulsation shows a positive effect. The micro-wedge structure arranged on the hydrofoil can delay the change cycle of the cavitation volume to different degrees, in which the chordwise position of 3.5 mm has the best cavitation suppression effect, and the cavitation suppression rate is about 16.7%.
1 August 2025 in Physics of Fluids
To enhance the range and reduce the energy consumption of marine equipment, inspired by the non-equal height ridge structures of the beluga whale and pilot whale body surfaces, we reconstructed analogous skin ridge features and designed a bionic non-smooth surface model for the Defense Advanced Research Projects Agency SUBOFF underwater vehicle. Four types of bionic surface structures, namely, V-shaped, circular arc, trapezoidal, and non-equal height trapezoidal, were evaluated using numerical simulations. The simulations employed the shear stress transport k–ω turbulence model to assess drag reduction performance under different flow conditions. The underlying drag reduction mechanisms were investigated based on velocity field, shear stress distribution, pressure field, and vortex structure analyses. The results indicate that the non-equal height trapezoidal structure exhibits the most effective drag reduction, achieving a local drag reduction rate of up to 6.7%. In addition, this structure shows reduced fluctuations in the friction coefficient and the smallest increase in pressure drag. Moreover, it also presents a lower shear stress gradient and a thicker boundary layer at the bottom, which contributes to decreased surface velocity and viscous drag.