Wind-based power is one of the renewable base power sources that are tipped to play a great role in decarbonising the globe. To achieve this potential, more wind farms are likely to be built. The capacity factor of a wind farm and hence its profitability is dependent on whether it is properly sized and sited. In fact, some wind power plants have failed wholly or underperformed, because the wind turbine plant installed did not match the wind site. In this paper, a new approximate capacity factor equation has been derived for matching wind turbines to potential site for optimum yield and profitability. The indexes of capacity factor and cost of electricity were used as metrics in the model. The proposed model was applied to the climatic conditions and wind turbine characteristics of Kappadagudda and Mailiao wind farms in India and Taiwan, respectively. The result obtained showed good agreement with measured data for the two wind farms. With respect to the Kappadagudda wind farm, the model computed CF of 38% is close to the Kappadagudda real wind farm annual CF of 36% representing an absolute error of 2% and a mean square error of 0.96%. In addition, it was found that the proposed model followed the same general trend with other six existing models compared.
Nigeria’s power infrastructure is dominated by polluting grid-connected fossil-based power systems. The Nation currently suffers from an acute electricity shortage, making nearly 40% of on-grid customers receive unreliable and inconsistent power below their demand. Solar resources are widespread in the country at considerably good potential than in many European nations. Nevertheless, Nigeria's solar photovoltaic (PV) installation capacity could be better. This paper presents the techno-economic, environmental and risk analysis of a grid-connected 10 kW, 100 kW, and 1 MW PV system for three customer segments in Abuja, Nigeria. It is found that a 1 MW grid-tied PV system is very viable at an electricity export rate not below 0.01 USD/kWh and a total initial cost (TIC) of not more than 2000 $/kW for fixed axis system and 2600 USD/kWh or lower for the two-axis system. The 10 kW and 100 kW PV systems are only financially viable with fiscal incentives. However, they become profitable with a minimum feed-in tariff of about 0.294, 0.297, 0.223 and 0.214 USD/kWh for the fixed 10 kW, 2-axis 10 kW, fixed 100 kW and two-axis 100 kW systems, respectively.