13 October 2022 in Journal of Petroleum Exploration and Production Technology
The closure fracture phenomenon increases the complexity of well testing and reduces the accuracy of productivity forecasts when tight oil reservoirs are exploited. However, most existing productivity models tend to ignore this. Therefore, a productivity prediction model for multi-fractured horizontal wells in tight oil reservoirs considering fracture closure has been developed by considering the stress sensitivity in the formation and combining the physical parameters of actual production. The model is solved by the Laplace transform, perturbation transform, Pedrosa transform, and Stehfest numerical inversion. Drawing productivity impact curves and discussing productivity influence factors based on the model results from this study show that the model is reasonable. In the actual production process, the hydraulic fracture parameter values are not as high as possible, and they have a reasonable range of values. The fracture closure pressure has a significant impact on the production of tight oil reservoirs. The higher the fracture closure pressure is, the greater the fracture conductivity decreases sharply, and the larger the proppant elastic modulus is, the stronger the fracture conductivity. The influence of fracture conductivity on the production in tight oil reservoirs has an obvious point, and when the value is less than the point, the production effect is good. Improved production can be achieved by balancing the relationship between fracture parameters. The findings of this study can help to better understand the influence of fracture parameters on productivity and contribute to increasing well production and improved development of tight oil reservoirs.
1 January 2024 in International Journal of Energy Research
This study focuses on addressing the challenge of accurately calculating the production caused by stress sensitivity and proppant embedment during actual production in low‐permeability gas reservoirs. To achieve this, a stress sensitivity model in the matrix zone and a proppant embedding model in the fracture area are established. Additionally, fluid flow models are formulated for the matrix zone and fracture area based on the seepage theory and fluid mechanics. Using these models, a production prediction model is developed for fractured horizontal wells in low‐permeability tight sandstone gas reservoirs considering the impact of proppant embedment. The production prediction model is solved using a coupling solution method, and the calculation results are verified against actual gas production. This study also analyses and discusses the stress sensitivity in low‐permeability gas reservoirs, the factors influencing conductivity, and the factors influencing productivity. The results indicate a strong stress sensitivity in the matrix area of low‐permeability gas reservoirs. In fracturing design, comprehensive consideration of fracture parameters is necessary. After fracturing, the optimal selection of proppants with appropriate particle sizes and careful optimization of the number of layers are crucial for maintaining stable production release. This research is significant for effectively and stably maximizing the productivity of low‐permeability gas reservoirs.