14 January 2022 in IEEE Journal on Selected Areas in Communications
In this work, we propose globally optimal power allocation strategies to maximize the users sum-rate (SR), and system energy efficiency (EE) in the downlink of single-cell multicarrier non-orthogonal multiple access (MC-NOMA) systems. Each NOMA cluster includes a set of users in which the well-known superposition coding (SC) combined with successive interference cancellation (SIC) technique is applied among them. By obtaining the closed-form expression of intra-cluster power allocation, we show that MC-NOMA can be equivalently transformed to a virtual orthogonal multiple access (OMA) system, where the effective channel gain of these virtual OMA users is obtained in closed-form. Then, the SR and EE maximization problems are solved by using very fast water-filling and Dinkelbach algorithms, respectively. The equivalent transformation of MC-NOMA to the virtual OMA system brings new theoretical insights, which are discussed throughout the paper. The extensions of our analyses to other scenarios, such as considering users rate fairness, admission control, long-term performance, and a number of future next-generation multiple access (NGMA) schemes enabling recent advanced technologies, e.g., reconfigurable intelligent surfaces are discussed. Extensive numerical results are provided to demonstrate the performance gaps among single-carrier NOMA (SC-NOMA), OMA-NOMA, and OMA.
11 November 2022 in IEEE Transactions on Network and Service Management
Open Radio Access Networks (O-RAN) architecture is based on disaggregation, virtualization, openness, and intelligence. These features allow the RAN network functions (NFs) to be split into Central Unit (CU), Distributed Unit (DU), and Radio Unit (RU); and deployed on open hardware and cloud nodes as Virtualized Network Functions (VNFs) or Containerized Network Functions (CNFs). In this paper, we propose strategies for the placement of CU and DU network functions in the regional and edge O-Cloud nodes while jointly associating the users to RUs. The aim is to minimize the end-to-end delay of users and minimize the cost of O-RAN deployment. Thus, we first formulate the end-to-end delay, the cost, and the constraints. We then model the problem as a multi-objective optimization problem The optimization formulation consists of a huge number of constraints and variables. To provide a solution to the problem, we develop the corresponding Markov Decision Problem (MDP) and propose a Deep Q-Network (DQN)-based algorithm. The simulation results demonstrate that our proposed scheme reduces the average user delay up to 40% and the deployment cost up to 20% with respect to our baselines.
6 September 2022 in IEEE Transactions on Communications
As one of the key technologies in 5G networks, Carrier Aggregation (CA) is studied in this paper. In CA, Component Carriers (CCs) can be activated and deactivated depending on multiple factors, e.g., energy consumption and Quality of Service (QoS) demand of users. We propose CC management strategies where each User Equipment (UE) minimizes its average delay and at the same time minimizes its power consumption while considering that CCs can be activated and deactivated only at certain times, as in real-world CA implementations. We first model the problem as a centralized multi-objective optimum CC management problem. Since centralized approaches would impose a large overhead on the system, we then develop a semi-distributed solution by modeling the problem as a stochastic game and propose a multi-agent Double Deep Q-Network (DDQN) based CC management algorithm to solve the stochastic game. We finally compare the proposed approaches with single CC activation and all-CC activation baseline schemes. Simulation results show that our proposed algorithms outperform the all-CC algorithm in terms of UE power consumption and have the capability of transmitting a number of bits with delay close to the all-CC scheme. Meanwhile, our DDQN-based algorithm decreases the UE power consumption by about 20% with respect to the all-CC scheme.
28 April 2021 in IEEE Networking Letters
In this letter, we consider 5G networks with Carrier Aggregation (CA). Our aim is to jointly select Component Carriers (CCs) and allocate Resource Blocks (RBs) such that total user throughput is maximized while user power consumption is minimized and Quality of Service (QoS) requirements are met. We formulate the User Equipment (UE) throughput and power consumption in terms of CC and RB indicators and propose a multi-objective optimization problem. Simulation results show that the proposed scheme outperforms the compared techniques by providing approximately 200mW reduction in power consumption while increasing the throughput by 2.7 times for users under short delay constraint.
19 July 2023 in IEEE Access
Aggregating multiple component carriers (CCs) from different frequency bands, also known as Carrier Aggregation (CA), and Dual Connectivity (DC), i.e., concurrently transmitting and receiving from two nodes or cell groups, are employed in 5G and 6G wireless networks to enhance coverage and capacity. In wireless networks with DC and CA, the performance can be boosted by dynamically adjusting the uplink (UL) transmit power level for the user equipments (UEs) and properly activating/deactivating the CCs for the UEs. In this paper, we study the problem of joint dynamic UL power-sharing and CC management. The objective is to simultaneously minimize the delay and power consumption for the UEs. The pertinent problem is a multi-objective optimization problem with both discrete and continuous variables and therefore is hard to solve. We first model it as a multi-agent reinforcement learning (RL) system with compound action to handle the problem. Then, we employ a compound-action actor-critic algorithm to find the optimal policy and propose the Joint Power-Sharing and Carrier Aggregation (JPSCA) algorithm. The performance of the JPSCA algorithm is compared with two baseline algorithms. Our results show that the performance of the JPSCA algorithm in terms of the average rate, delay, and UL transmit power level outperforms the baselines where UL power control and CC management are performed disjointly. For 25 UEs, our proposed JPSCA algorithm decreases the UE power consumption and UE delay by about 28% and 16%, respectively, concerning the all-CC and equal power-sharing schemes.
8 April 2024 in IEEE Transactions on Green Communications and Networking
Carrier Aggregation (CA) is a promising technology in LTE and 5G networks that enhances the throughput of the users. However, since each User Equipment (UE) has to continuously monitor the activated Component Carriers (CCs) in CA, the UE energy consumption increases. To reduce the energy consumption while maximizing the throughput of UEs, we propose a dynamic and proactive CC management scheme for 5G, using a Q-Learning algorithm. To address our problem, we first model the corresponding Constrained Multi-agent Markov Decision Process (CMMDP) model and then utilize the Q-Learning algorithm to solve it. The time inter-arrival and the size of the next incoming bursts of data are proactively predicted and, along with the data in the buffer, are considered in the state space and the reward function of the machine learning model. Our proposed scheme is compared to three baseline schemes. In the first and second baseline algorithms, all CCs and only single CC are activated for each UE, respectively. For the last baseline algorithm, we simplify our Reinforcement Learning (RL) algorithm, in which the remaining data in the scheduling buffer of users is not considered and also the throughput and the number of activated CCs is balanced in the low traffic load. Simulation results reveal that our proposed Q-Learning algorithm outperforms the baselines. It achieves the same throughput as the all CC activation algorithm while reducing the UE power consumption by about 20%. These benefits are achieved by dynamically activating and deactivating CCs according to the UE traffic pattern.