Selective Laser Melting (SLM) is an additive manufacturing technique widely used today for producing metal components. This method enables the fabrication of geometrically complex parts while reducing costs and production time compared to traditional manufacturing techniques. However, a notable drawback of SLM is its tendency to produce high surface roughness and superficial defects such as balling, porosity, debris, and waviness. This study evaluates the effects of modifying two manufacturing parameters—scanning speed and laser power—on the final surface roughness. To achieve this, cylindrical specimens were fabricated using various combinations of these parameters, and the resulting surface roughness metrics (Sa, Sq, Ssk, Sku, Sdr, among others) were measured using an optical 3D surface roughness measurement instrument. A Taguchi L8 design was applied to analyse the influence of the manufacturing parameters on the measured roughness characteristics. This study investigates the influence of laser power and scanning speed on surfaces manufactured through Selective Laser Melting (SLM) and their effects on the previously described roughness parameters. The authors observed that the manufacturing parameters have varying impacts on the final surface roughness of components produced via SLM. Due to the inherent characteristics of the process, a specific combination of parameters that reduces roughness within a specimen's layer may increase roughness at the layer boundaries. These findings underscore the complex relationship between manufacturing parameters and surface roughness in SLM-produced parts, emphasizing the need for strategies, such as surface finishing post-treatments, to achieve the desired surface quality.
It has been proposed that ocular movements could be related to the pathogenesis of glaucoma. The purpose of this research was to compare the impact of intraocular pressure (IOP) versus horizontal ocular duction on optic nerve head (ONH) strains. Thus, from a series of medical tests and anatomical data, a tridimensional finite element model of the eye was developed. The ONH was divided into 22 subregions, and the model was subjected to 21 different eye pressures, as well as 24 different grades of ocular adduction and abduction from 0.5 to 12°. Mean deformations in maximum and minimum principal directions, as well as along the anatomical axes, were documented. The results show no statistically significant differences between the strains due to ocular rotation and variation of the IOP. Nevertheless, some laminar regions experienced a reduction in maximum and minimum principal strains following a 12° eye duction; by contrast, after the IOP reached 12 mmHg, an increase in strains was obtained in all the lamina cribosa subzones. From an anatomical perspective, the biomechanical effect on ONH following 12° ocular duction was opposite to that observed after an increase in IOP. Finally, high strain dispersion inside the ONH subregions was obtained with ocular duction, which was not observed with increased IOP and variation. Thus, it can be concluded that even when horizontal eye movements generate important ONH deformations, its biomechanical effect would be markedly different from that induced by IOP. It could be predicted that the potential to generate axonal damage would be much higher during increasing IOP than during eye movements. Funding Information: None. Conflict of Interests: The authors declare that there is no conflict of interests.
This document takes the case of Cuevana—where an Argentine judge ordered the blocking of several pages of this website due to a possible violation of copyright laws—as a starting point to analyze the tension between intellectual property protection and content sharing on the internet.Drawing on the experience of countries that have led this public policy, the text highlights critical elements to consider, such as prior restrictions on internet access, the proportionality of the measures, and the role of intermediaries.The main objective is for this document to serve as a discussion tool for the entire region. Specifically, it is hoped that in the debate on legislative proposals regarding this issue, the potential negative effects that certain copyright protection standards may have on the development and use of the internet will be carefully examined.This document concludes with the following reflections:The protection of copyright at the expense of fundamental citizen rights, such as due process and freedom of expression, raises the question of what the true priority of states is when regulating the internet.International pressure and obligations under international treaties suggest that our region is at risk of adopting equally restrictive laws.Copyright protection, like other key decisions in internet governance, will determine to what extent the digital era will serve to strengthen our democracies.