The efficient and stable operation of the proton exchange membrane fuel cell (PEMFC), as well as the extension of its working life, are highly dependent on the precise management of the fuel supply at the anode side of the stack fed by the hydrogen supply system. Ensuring adequate anode fuel supply and stable hydrogen supply pressure necessitates meticulous system regulation. This study proposes a single-injector-based backstepping sliding mode controller (BSMC), which can be effectively utilized in fuel cell hydrogen supply systems. Especially, considering the influence of purge action on the system, the radial basis function (RBF) neural network is combined with BSMC to compensate for the unknown disturbance caused by purging, which is used to correct the backstepping sliding mode control rate under different system states. Simulation results show that the stability and target tracking performance of BSMC with RBF neural network compensation for purge disturbances are as follows. The maximum tracking error is 8.173 kPa, the average error is 0.17 kPa, and the root mean square error is 0.53 kPa. Thus, the proposed method controller offers superior stability and robustness compared to traditional proportional-integral-derivative (PID) controllers under conditions of step load current, variable targets, and purge disturbances.
The dynamic behavior of hydrogen gas in the anode recirculation loop of a proton exchange membrane fuel cell (PEMFC) is governed by coupled flow‐pressure interactions within the ejector, supply manifold, and stack channels, making precise pressure regulation a critical challenge for system efficiency, stability, and lifetime. Ensuring adequate anode fuel supply and stable hydrogen supply pressure requires meticulous control of the gas handling system. This study proposes a single‐ejector‐based backstepping sliding mode controller (BSMC) for PEMFC hydrogen recirculation systems. To compensate for the unknown gas flow disturbance induced by periodic purging, a radial basis function (RBF) neural network is integrated with the BSMC, which adaptively corrects the control law under different system states. Simulation results demonstrate that the proposed RBF‐compensated BSMC effectively mitigates purge‐induced pressure fluctuations. The controller achieves a maximum tracking error of 8.173 kPa, a mean absolute error of 0.17 kPa, and a root mean square error of 0.53 kPa. Consequently, the proposed control strategy offers superior stability and robustness compared to conventional proportional‐integral‐derivative (PID) controllers under step load current variations, variable pressure targets, and periodic purge disturbances.