1 January 2016 in Chinese Physics C
29 July 2016 in Chinese Physics C
22 September 2010 in Physical Review Special Topics - Accelerators and Beams
The ATF2 project is the final focus system prototype for the ILC and CLIC linear collider projects, with a purpose to reach a 37~nm vertical beam size at the interaction point using compact optics based on a novel scheme of local chromaticity correction. Construction of all components and installation were completed at the end of 2008. An initial commissioning phase followed in 2009, using larger than nominal $\beta${} functions at the interaction point, corresponding to reduced demagnification factors in comparison to the design, to limit effects from higher-order optical aberrations and hence simplify beam tuning procedures while key instrumentation was being tested and calibrated. In this paper, first measurements of dispersion and Twiss parameters are presented based on scanning the beam during this period with a set of tungsten wires located just behind the interaction point, using two complementary analysis methods.
22 November 2016 in International Journal of Modern Physics A
1 April 2025 in Journal of Instrumentation
Vertical emittance is a critical factor in achieving high luminosity in modern circular colliders. The combination of the detector solenoid field, the anti-solenoid field, and the crossing angle in the interaction region serves as a significant source of vertical emittance growth within the local compensation scheme. This paper analyzes the growth of vertical emittance induced by the solenoid field in the interaction region and proposes an analytical method to identify configurations of the solenoid field that effectively minimize this growth, thereby facilitating the design of a realistic anti-solenoid field. This analytical method is applied to the Z energy of the Circular Electron Positron Collider (CEPC), which presents significant challenges due to its relatively low energy level. The results obtained from this method are compared with those from a numerical approach, indicating that the analytical method yields a solution close to that obtained through the numerical method. The error analysis is conducted to examine the relationships between the misalignment and tilt of the solenoid and the growth of vertical emittance.
30 October 2022 in International Journal of Modern Physics A