1 May 2024 in Meteorological Applications
Precipitation estimation models are typically sourced by rain gauges, weather radars and satellite observations. A relatively new technique of precipitation estimation relies on the network of Commercial Microwave Links (CMLs) employed for cellular communication networks: the rain‐inducted attenuation in the links enables the precipitation estimation. In the paper, it is analysed to what extent the precipitation derived from CML attenuation data is useful in estimation of the precipitation field with the high temporal and spatial resolution required in nowcasting models. Two methods of determination of precipitation along CMLs from attenuation of signal with several frequencies were proposed. Then, in order to generate precipitation field, three approaches for assigning appropriate precipitation values to a specific point or set of pixels along the link are developed and tested. The CML‐based estimates are compared with point observations from manual rain gauges and multi‐source precipitation fields using daily and half‐hourly accumulations. It was found that the CML‐based precipitation fields are much worse than radar‐derived estimates. At the same time, they had slightly poorer reliability than spatially interpolated telemetric rain gauge data and significantly higher reliability than satellite estimates. Furthermore, the impact of link characteristics, such as length and frequency, on the reliability of CML‐based precipitation estimates is analysed.
11 September 2023 in Atmospheric Measurement Techniques
This paper explores the possibility of using multi-source precipitation estimates for climatological applications. A data-processing algorithm (RainGRS Clim) has been developed to work on precipitation accumulations such as daily or monthly totals, which are significantly longer than operational accumulations (generally between 5 min and 1 h). The algorithm makes the most of additional opportunities, such as the possibility of complementing data with delayed data, access to high-quality data that are not operationally available, and the greater efficiency of the algorithms for data quality control and merging with longer accumulations. Verification of the developed algorithms was carried out using monthly accumulations through comparison with precipitation from manual rain gauges. As a result, monthly accumulations estimated by RainGRS Clim were found to be significantly more reliable than accumulations generated operationally. This improvement is particularly noticeable for the winter months, when precipitation estimation is much more difficult due to less reliable radar estimates.
24 March 2023 in Authorea
Precipitation estimation models are typically sourced by rain gauges, weather radars and satellite observations. A relatively new technique of precipitation estimation relies on the network of Commercial Microwave Links (CMLs) employed for cellular communication networks: the rain-inducted attenuation in the links enables the precipitation estimation. In the paper it is analysed to what extent the precipitation derived from CML attenuation data is useful in estimation of the precipitation field with the high temporal and spatial resolution required in nowcasting models. Two methods of determination of precipitation along CMLs from attenuation of signal with several frequencies were proposed. Then, in order to generate precipitation field, three approaches for assigning appropriate precipitation values to a specific point or set of pixels along the link are developed and tested. The CML-based estimates are compared to point observations from manual rain gauges and multi-source precipitation fields using daily and hourly accumulations. It was found that the CLM-based precipitation fields are much worse than radar-derived estimates. At the same time, they had slightly poorer reliability than spatially interpolated telemetric rain gauge data and significantly higher reliability than satellite estimates. Keywords — precipitation estimation, commercial microwave links, CML