In a previous work [Appl. Opt. 44, 5688 (2005) ] we found the optimum sensors for a planned multispectral system for measuring skylight in the presence of noise by adapting a linear spectral recovery algorithm proposed by Maloney and Wandell [J. Opt. Soc. Am. A 3, 29 (1986) ]. Here we continue along these lines by simulating the responses of three to five Gaussian sensors and recovering spectral information from noise-affected sensor data by trying out four different estimation algorithms, three different sizes for the training set of spectra, and various linear bases. We attempt to find the optimum combination of sensors, recovery method, linear basis, and matrix size to recover the best skylight spectral power distributions from colorimetric and spectral (in the visible range) points of view. We show how all these parameters play an important role in the practical design of a real multispectral system and how to obtain several relevant conclusions from simulating the behavior of sensors in the presence of noise.
In a previous work [J. Opt. Soc. Am. A 24, 942–956 (2007)] we showed how to design an optimum multispectral system aimed at spectral recovery of skylight. Since high-resolution multispectral images of skylight could be interesting for many scientific disciplines, here we also propose a nonoptimum but much cheaper and faster approach to achieve this goal by using a trichromatic RGB charge-coupled device (CCD) digital camera. The camera is attached to a fish-eye lens, hence permitting us to obtain a spectrum of every point of the skydome corresponding to each pixel of the image. In this work we show how to apply multispectral techniques to the sensors’ responses of a common trichromatic camera in order to obtain skylight spectra from them. This spectral information is accurate enough to estimate experimental values of some climate parameters or to be used in algorithms for automatic cloud detection, among many other possible scientific applications.
In a previous work [J. Opt. Soc. Am. A 24, 942 (2007)] we made a complete theoretical and computational study of the influence of several parameters on the behavior of a planned multispectral system for imaging skylight, including the number of sensors and the spectral estimation algorithm. Here we follow up this study by using all the information obtained in the computational simulations to implement a real multispectral imaging system based on a monochrome CCD camera and a liquid-crystal tunable filter (LCTF). We were able to construct the optimum Gaussian sensors found in the simulations by adjusting the exposure times of some of the transmittance modes of the LCTF, hence obtaining really accurate spectral estimations of skylight with only a few optimum sensors.