To cope with the explosive increase in electromagnetic radiation intensity caused by the widespread use of electronic information equipment, high-performance electromagnetic wave (EMW)-absorbing materials that can adapt to various frequency bands of EMW are also facing great demand. In this paper, CH3NH3PbI3/graphene (MG) high-performance EMW-absorbing materials were innovatively synthesized by taking organic–inorganic hybrid perovskite (OIHP) with high equilibrium holes, electron mobility, and accessible synthesis as the main body, graphene as the intergranular component, and adjusting the component ratio. When the component ratio was 16:1, the thickness of the absorber was 1.87 mm, and MG’s effective EMW absorption width reached 6.04 GHz (11.96–18.00 GHz), achieving complete coverage of the Ku frequency band. As the main body of the composite, CH3NH3PbI3 played the role of the polarization density center, and the defects and vacancies in the crystal significantly increased the polarization loss intensity; graphene, as a typical two-dimensional material distributed in the crystal gap, built an efficient electron transfer channel, which significantly improved the electrical conductivity loss strength. This work effectively broadened the EMW absorption frequency band of OIHP and promoted the research process of new EMW-absorbing materials based on OIPH.
With the increasing influence of electromagnetic radiation on precision instruments and organisms, there is an urgent need for research on lightweight and high-strength electromagnetic wave absorbing materials. This study has probed into a new composite absorbing material based on reduced graphene oxide (rGO)-NiMnO3, where the like-core-shell NiMnO3 is anchored on the rGO nanosheets to significantly improve the electromagnetic wave dissipation ability of the composite material using the inter-component dipole polarization and interface polarization. At the same time, NiMnO3 can effectively adjust the impedance matching ratio of rGO so that electromagnetic waves can effectively enter the absorbing material. At a thickness of 3.73 mm, the maximum absorption strength of rGO-NiMnO3 reaches −61.4 dB at 6.6 GHz; at a thickness of 2.5 mm, the adequate absorption bandwidth is 10.04–18.00 GHz, achieving a full coverage for the Ku band. As a new option for preparing lightweight and broadband electromagnetic wave absorbing materials, rGO-NiMnO3 is an ideal material for electromagnetic wave protection.
High-performance electromagnetic wave absorption materials are desperately needed due to the growing serious electromagnetic interference and pollution issues brought on by the quick growth of modern electronic technology and wireless communication. This work uses the organic–inorganic hybrid perovskite MAPbBrxI3−x as a model system to address the problem of restricted loss mechanisms and the challenges in changing the absorption bandwidth of single-component wave-absorbing materials. It achieves systematic tuning of electromagnetic wave absorption performance, especially within the effective working frequency spectrum, through accurate halogen site engineering. According to the study, MAPbI3 (MPI), MAPbBr1.5I1.5 (MPIB), and MAPbBr3 (MPB), which were synthesized using the anti-solvent approach, all demonstrated exceptional microwave absorption capability, with maximum reflection loss values exceeding −37 dB, among which MPB achieves a remarkable value of −42.41 dB at 16.60 GHz. More significantly, this work shows a distinct structure-property relationship between the effective absorption peak frequency range of this series of materials and their band structure: the strongest absorption peak shows a regular blue shift as the material bandgap widens and the bromine content rises. This finding suggests that focused tailoring of the operating frequency band in wave-absorbing materials can be achieved by manipulating the band structure of perovskites by varying the halogen concentration. In addition to confirming the significant application potential of organic–inorganic hybrid perovskites in the field of microwave absorption, this study offers a novel research perspective and material template for precisely and programmably controlling the absorption frequency band of wave-absorbing materials based on their basic electronic structures.