Kai Li

Kai Li

Auto-generated profile, based on publicly available information

Kai Li

Xuzhou XCMG Excavator Machinery Co., Ltd., Xuzhou 221000, China

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2026 in Metals
Verified
Journal Article
Open access
PDF file
YXYubing Xu
Yubing Xu
DZDing Zhang
Ding Zhang
KLKai Li
Kai Li
CTChao Tian
Chao Tian
SLShanhui Li
Shanhui Li
CSChengjin Shen
Chengjin Shen
Fe-Cr-C-based coatings were fabricated on Q690 steel via ultrasonic vibration-assisted plasma cladding at varying ultrasonic powers (0–65 W) with a fixed frequency of 18.5 kHz. The coatings primarily consisted of martensite, retained austenite, and (Cr,Fe)7C3 carbides, along with (Cr,Fe,Mo)-B borides along grain boundaries. Increasing ultrasonic power promoted cavitation and acoustic streaming, which refined columnar dendrites, reduced elemental segregation (notably for B and Mo), and increased the fraction of fine equiaxed grains without altering phase composition. As a result, the average microhardness increased from 797.1 to 828.5 HV0.1. The friction coefficient decreased from 0.675 to 0.626, while the wear-track width, wear depth, and wear mass loss decreased from 4.0 mm to 2.5 mm, from 112.5 μm to 32.4 μm, and from 20.40 mg to 4.75 mg, respectively. The wear mechanism shifted from severe adhesive wear to mild abrasive wear. These results demonstrate that increasing ultrasonic vibration power effectively refines the solidification microstructure and significantly improves the hardness and wear resistance of plasma-clad Fe-Cr-C-based coatings.