15 May 2020 in IEEE Internet of Things Journal
Low Power Wide Area (LPWA) networks has been proposed to satisfy the features of massive machine-type communication (mMTC) of Internet of Things (IoT) networks with large number of end-devices, such as low data rates, high network scalability, wide area coverage, and delay tolerance with very low energy cost. The LoRa wide area network (LoRaWAN) is one of the leading technologies among LPWA networks and supports three types of medium access control (MAC) options: class A, class B, and class C, each of which are used to address different needs of various applications. Specifically, Class B is designed to reduce downlink frame transmission delay while the end-device maintains a relatively low energy consumption. In this paper, we propose an analytical model of LoRaWAN class B mode, focusing on the delay, the data throughput, and the energy consumption for downlink frame transmission using M/G/1 queueing model. Based on the analytical model, a cost function considering both the average waiting time of the frame in the gateway and the average energy consumption of an end-device is proposed. Using the cost function, we derive the optimal number of ping-slots which maximizes the value of the cost function. Results show the trade-off relation between the waiting time of the frame in the gateway and the energy consumption of an end-device, and it is verified that the optimal number of ping-slots increases as the traffic density increases.
20 August 2021 in IEEE Transactions on Vehicular Technology
Device-to-device (D2D) communication affords the benefits of improved network spectral efficiency, throughput, energy efficiency, and delay performance. However, D2D communication underlaid cellular uplinks are degraded by interference between D2D user equipment (DUE) and cellular user equipment (CUE) that use the same frequency band. In this context, researchers have proposed the optimization of the transmit power of the devices to mitigate interference. This power allocation problem is generally modeled as a NP-hard combinatorial optimization problem with linear constraints; therefore, traditional optimization methods are ineffective in addressing the problem. In this paper, we apply a deep reinforcement learning (DRL) algorithm to optimize the transmit power for both DUEs and CUEs in the context of D2D communication underlaid uplink cellular networks, which can solve the optimization problem via optimal decision-making together with efficient deep network training. Our simulation results show that the proposed algorithm affords a near-global-optimum solution with lower computation complexity than exhaustive search, and outperforms the fixed-power, weighted minimum mean square error (WMMSE), gradient descent method, and Newton-Raphson approaches.
9 August 2021 in IEEE Systems Journal
In this article, we study the optimization of energy efficiency in wireless device-to-device (D2D-underlaid cellular networks where multiple D2D pairs adopt simultaneous wireless information and power transfer functionality. We formulate the optimization problem, which is a NP-hard combinatorial problem with nonlinear constraints. First, we use optimization-based-iterative techniques such as exhaustive search (ES) and gradient search (GS) with barrier, which are generally used to obtain the global optimum and local optimum of the nonconvex optimization problem, respectively. Considering that these techniques require a centralized unit to share information with each other, we propose multiagent deep reinforcement learning to solve this optimization problem in a distributed manner, which provides optimal decision making together with efficient deep network training under inequality constraints including transmit power, power splitting ratio, and minimum requirement data rate for D2D and cellular users. In this proposed method, we consider the virtual environment in which each agent can train their model according to shared information, and then, we deploy the trained model into the actual environment where each agent can only know their channel gain, interference power, and required minimum throughput. Simulation results show that the proposed algorithm can afford a near-global-optimum solution with much lower computation complexity than ES and outperforms the GS.
21 July 2022 in IEEE Transactions on Vehicular Technology
Vehicle-to-vehicle (V2V) communication has been designed to afford improvements in the traffic congestion and traffic accidents by directly exchanging information between nearby vehicles. However, V2V communication may have difficulty providing service reliability due to interference between V2V links and vehicle-to-cellular user equipment links. In this paper, we consider the transmit power control algorithm to minimize interference among cellular users and vehicles in the context of V2V communication underlaid uplink cellular networks. First, we formulate the problem, which is an NP-hard combinatorial optimization problem with linear constraints. Addressing this problem with traditional optimization methods is ineffective; therefore, we design and train a deep neural network to address this optimization problem. Computational complexity analyses and simulation results reveal that the proposed algorithm outperforms weighted minimum mean squared error (WMMSE), fixed transmit power, and Dinkelbach's methods, and achieves near-global optimum with lower computation complexity than the exhaustive search (ES).
12 March 2022 in Expert Systems with Applications
25 November 2020 in IEEE Access
Wireless body area networks (WBANs) exhibits immense potential for application in ubiquitous healthcare systems. However, in dense environments where multiple WBANs are deployed such as hospitals, the performance of WBANs is deteriorated by inter-network interference. In this study, we apply Kuramoto model to the transmission power control of users in WBAN environments with the purpose of addressing the issue of inter-network interference, and thereby improving the Quality of Service (QoS) fairness in WBAN environment. For this purpose, we define the utility function which expresses the QoS of a user and synchronize this utility function value of each user for fair resource allocation. The synchronization of the utility function is obtained by Kuramoto model and coupling coefficient defined in Kuramoto model is dynamically adjusted for faster convergence. The range of convergence of the Kuramoto model is derived analytically. From the simulation results, we can verify that the performance of the proposed algorithm is better than those of the existing algorithms with regard to QoS fairness, power, and data rate. In addition, we show that the convergence speed of the proposed algorithm with adaptive coupling strength parameter outperforms the Kuramoto model with fixed coupling strength parameter.