10 October 2023 in IEEE Antennas and Wireless Propagation Letters
This letter theoretically investigates acoustically excited antennas (AEAs) using a proposed multi-physics finite-difference time-domain (FDTD) method. The FDTD-based coupling equations according to the antenna reception principle are constructed. The reception performance and resonance modes at electromechanical resonance frequency are studied. Effects of material attributes, antenna thickness, and receiving area on the antenna reception characteristics are analyzed. The simulation methodology can provide a reference for physical preparation, parameter optimization, and geometry optimization of near-field communication and implantable medical antennas.
3 July 2025 in IEEE Electron Device Letters
This letter presents an ultra-compact magnetoelectric (ME) antenna based on a laterally excited bulk acoustic wave resonator (XBAR) structure integrated with magnetostrictive (MS) interdigital transducers (IDTs). The antenna design leverages three distinct resonant regions within a single device: pseudo thin-film bulk acoustic resonator (PFBAR) and contour mode resonator (CMR)-like single-IDT regions, XBAR-type paired-IDT regions, and a floating electrode higher-overtone bulk acoustic resonator (FHBAR) region. These resonant units collectively enable multimodal electromagnetic (EM) radiation with improved gain and broadened operational bandwidth. The device is fabricated using a FeGaB/AlScN/Mo multilayer stack on a silicon substrate via CMOS-compatible processes. Experimental results demonstrate peak gains of −17.8 dBi at 0.268 GHz and −20.5 dBi at 0.667 GHz. This work provides new insights into the design of high-integration, multimode ME antennas and offers a promising solution for future miniaturized wireless communication systems.
2 June 2025 in Applied Physics Letters
Magnetoelectric (ME) antennas driven by shear horizontal surface acoustic waves (SH-SAWs) exhibit significant potential for miniaturized high-frequency systems owing to their structural simplicity and acoustic–magnetic coupling characteristics. In this work, we demonstrate an SH-SAW driven ME antenna based on a 42° YX-LiTaO3/FeGa heterostructure, achieving a reference gain of −18.4 dBi and radiation efficiency of 0.52%. Through bias magnetic field modulation, we experimentally observe enhanced coupling between shear horizontal mode and magnetization of FeGa film. These findings provide a method for optimizing radiation efficiency in acoustically driven ME antennas, for the design and performance improvement of ME antennas.
15 November 2024 in IEEE Sensors Journal
Piezoelectric acoustically excited antenna (PAEA) based on the efficient oscillation of electric dipoles has recently been considered as a potential solution for portable low-frequency (LF, 30-300 kHz) transmitting. However, improper material selection will restrict the scope of applications for PAEAs. This paper has compared three types of PAEAs’ performance that operate in comparable frequency ranges. The finite element analysis (FEA) uses the Y36° cut lithium niobate (LN) crystal as an example. It has been demonstrated that it fulfills the half-wavelength resonance and that, compared to the miniaturized electrically actuated antenna operating in the same frequency range, its size is four orders of magnitude smaller. Following processing, the three antennas’ measured findings reveal that: LN in the experiment has the best efficiency, while lead zirconate titanate (PZT) has the widest -3dB bandwidth, and potassium dihydrogen phosphate (KDP) has the greatest frequency stability, allowing PAEA to select materials based on different demand scenarios. The results are believed to bring PAEAs closer to applicability in LF transmitting.
26 May 2025 in Applied Physics Letters
Acoustically driven magnetoelectric (ME) antennas present a promising approach for achieving orders-of-magnitude miniaturization. However, conventional resonator-based ME antennas suffer from substantial acoustic energy leakage, which limits the effective utilization of the magneto-acoustic coupling effect in the magnetostrictive (MS) film. In this work, we propose and experimentally demonstrate a surface acoustic wave ME antenna based on a piezoelectric-on-insulator substrate. By employing focused interdigital transducers, we spatially confine acoustic waves, significantly enhancing the acoustic energy density within the MS film and thereby improving the efficiency of magneto-acoustic coupling. Experimental results reveal that with MS film loading, the antenna's radiated power increases by a factor of 32.55 compared to an unloaded reference structure, achieving a gain of −26.78 dBi, an electromechanical coupling coefficient (k2) of 8.79%, a quality factor (Q) of 217, and a figure of merit (FoM, k2×Qmax) of 19.07. Furthermore, applying an external bias magnetic field of 300 Oe modulates the magnetocrystalline anisotropy, leading to a 1.84% enhancement in the antenna's resonance characteristics and a 7.15% improvement in radiation performance. By varying the magnetic field orientations, we further verify the proposed structure's omnidirectional magneto-acoustic coupling behavior. These findings provide insights into the design of next-generation miniaturized antennas with enhanced performance and tunability.
6 November 2024 in IEEE Antennas and Wireless Propagation Letters
The acoustically excited antennas based on the piezo- electric effect (PE) have been shown to reduce the size of the long wave communication system transmitter (Tx) to 10-4 of the wave- length. However, their practical application is limited due to the narrow bandwidth and weak transmission energy associated with the piezoelectric resonance mechanism. In this letter, we present a PMN-PT relaxor ferroelectric ceramic doped with samarium (Sm), which significantly enhances the radiation performance of the PE Tx and exhibits electrostrictive capabilities ranging from medium-high frequency (MF-HF). Using a tiny Tx (4 mm in diameter and 3 mm in thickness), we achieved a radiation distance of over 30 m, with an average transmission gain of more than 13 dB higher than that of the traditional PE Tx. To verify the appli- cation, we have carried out the preliminary attempt of superficial earth detection. This design provides an effective method to pro- mote the applications of piezoelectric Tx.