3 December 2018 in Applied Physics Letters
β-Ga2O3 has attracted considerable interest in recent years for high power electronics, where the thermal properties of β-Ga2O3 play a critical role. The thermal conductivity of β-Ga2O3 is expected to be three-dimensionally (3D) anisotropic due to the monoclinic lattice structure. In this work, the 3D anisotropic thermal conductivity tensor of a (010)-oriented β-Ga2O3 single crystal was measured using a recently developed elliptical-beam time-domain thermoreflectance method. Thermal conductivity along any direction in the (010) plane as well as the one perpendicular to the (010) plane can be directly measured, from which the 3D directional distribution of the thermal conductivity can be derived. Our measured results suggest that at room temperature, the highest in-plane thermal conductivity is along a direction between [001] and [102], with a value of 13.3 ± 1.8 W m−1 K−1, and the lowest in-plane thermal conductivity is close to the [100] direction, with a value of 9.5 ± 1.8 W m−1 K−1. The through-plane thermal conductivity, which is along the [010] direction, has the highest value of 22.5 ± 2.5 W m−1 K−1 among all the directions. The temperature-dependent thermal conductivity of β-Ga2O3 was also measured and compared with a theoretical model calculation to understand the temperature dependence and the role of impurity scattering.
1 August 2019 in Materials Today Physics
4 January 2018 in Journal of Applied Physics
Recent research has highlighted the potential to achieve high-thermal-conductivity polymers by aligning their molecular chains. Combined with other merits, such as low-cost, corrosion resistance, and light weight, such polymers are attractive for heat transfer applications. Due to their quasi-one-dimensional structural nature, the understanding on the thermal transport in those ultra-drawn semicrystalline polymer fibers or films is still lacking. In this paper, we built the ideal repeating units of semicrystalline polyethylene and studied their dependence of thermal conductivity on different crystallinity and interlamellar topology using the molecular dynamics simulations. We found that the conventional models, such as the Choy-Young's model, the series model, and Takayanagi's model, cannot accurately predict the thermal conductivity of the quasi-one-dimensional semicrystalline polyethylene. A modified Takayanagi's model was proposed to explain the dependence of thermal conductivity on the bridge number at intermediate and high crystallinity. We also analyzed the heat transfer pathways and demonstrated the substantial role of interlamellar bridges in the thermal transport in the semicrystalline polyethylene. Our work could contribute to the understanding of the structure–property relationship in semicrystalline polymers and shed some light on the development of plastic heat sinks and thermal management in flexible electronics.
23 April 2019 in Journal of Applied Physics
The trans-gauche state transformation commonly exists in polymers. However, the fundamental understanding of the roles of kink (gauche state) on the thermal energy transport in polymer chains is rather limited. From atomic simulations, we show that kinks greatly scatter phonons in single polyethylene chains, and even a single kink can reflect more than half of the phonons. Further studies show that kinks not only add extra thermal resistance to the chain but also break the whole chain into small segments and each with reduced thermal conductivity. A simple series thermal resistance model is proposed to estimate the effective thermal conductivity of single polymer chains with multiple kinks.
17 May 2021 in Journal of Applied Physics
The existing theories for the thermal boundary conductance (TBC) of solid–solid interfaces lead to diverse values deviating from experimental measurements. In this paper, we propose a simple mechanism to evaluate the TBC contributed by phonons at room temperatures, where the microscopic structure of the interface layers between two dissimilar solids is treated as amorphous by taking into account the mismatches of the elastic modulus, the atomic masses, and the lattice spacing. Our theory explains well the observed magnitude of the TBCs across various solid–solid interfaces in the range from to . The coordination number density and the energy transfer coefficient across interfaces are key parameters for determining the TBCs.