Muhammad Hameed Al-Timimi

Muhammad Hameed Al-Timimi

Auto-generated profile, based on publicly available information

Muhammad Hameed Al-Timimi


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2023 in East European Journal of Physics
Verified
Journal Article
Open access
PDF file
MAMuhammad H. Al-Timimi
Muhammad H. Al-Timimi
WAWidad H. Albanda
Widad H. Albanda
MAMustafa Z. Abdullah
Mustafa Z. Abdullah
MgO Nanostructured thin films with different thicknesses (200, 400, and 600 nm) have been deposited by the chemical spray pyrolysis technique. The results confirm that the structure, morphology, optical, and electrical properties were all affected by the thickness of the film. MgO films' physical properties were examined using (XRD), (FE-SEM), (EDX), (AFM), (UV-Vis spectrophotometer), and the Hall Effect. According to the structural analysis, the films have a cubic magnesium oxide polycrystalline structure, with a preferred orientation (002). The average Crystalline Size and optical band gap are found in the range (20.79-18.99) nm and (3.439-3.162) eV respectively with an increase in thickness. The surface morphology of the films reveals that they are free of crystal defects such as holes and voids, as well as homogeneous and uniform. The EDS patterns show that the as-grown films contain magnesium and oxygen. The Hall Effect shows that electrical conductivity decreases with thickness. The experimental results show that film thickness influences the physical properties of as-grown MgO thin films and that thicker films can be used as an absorber layer in solar cell applications.

4 September 2023 in East European Journal of Physics
Verified
Journal Article
Open access
PDF file
RAR.H. Ayoub
R.H. Ayoub
MAMuhammad H. Al-Timimi
Muhammad H. Al-Timimi
MAM.Z. Abdullah
M.Z. Abdullah
This study investigates the structural and optical properties of MgO:SnO2 nanoparticles using the Chemical precipitation method, The thin films were deposited by the spin coating technique on glass substrates. X-ray diffraction analysis proved the crystalline structure of prepared thin films, with the peaks corresponding to the (110), (101), (200), (211), and (220) planes, with the tetragonal SnO2 crystal structure, Fourier transforms infrared (FTIR), and scanning electron microscope (SEM) used to characterize the functional groups, shape, and dimensions of synthesized metal oxide nanoparticles. The optical properties of the films were studied by UV-Vis spectroscopy, and the bandgap energy was estimated to be in the range of (3.9 - 3.4 eV). The refractive index and extinction coefficient of the films were also determined, and the results indicated that the films had good transparency in the visible region, The study concludes that MgO:SnO2 thin films obtained by spin coating technique have potential applications in optoelectronics and gas sensors.

4 September 2023 in East European Journal of Physics
Verified
Journal Article
Open access
PDF file
NHN.A. Hassan
N.A. Hassan
WAW.H. Albanda
W.H. Albanda
MAM.H. Al-Timimi
M.H. Al-Timimi
This article reports on the fabrication and characterization of MgO nanostructured films and the effect of ZnS and CdS on their structural, optical, and electrical properties. The MgO, MgO: ZnS, and MgO: CdS thin films were deposited using a Chemical spray pyrolysis technique onto glass substrates at 673 K. The XRD patterns revealed that the MgO thin films had a preferred (111) orientation with a pure cubic crystalline structure, while the ZnS and CdS layers had a hexagonal structure. The FE-SEM images showed that the MgO films had a nanostructured morphology with an average particle size of ~50 nm. The UV-Vis spectroscopy results showed that the addition of ZnS and CdS layers to the MgO films resulted in a shift in the absorption edge towards the visible region of the electromagnetic spectrum, indicating an improvement in their optical properties. These findings suggest that the MgOZnS and MgOCdS films could have potential applications in optoelectronic devices.

19 July 2024 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
HHHudaa Homad
Hudaa Homad
NANoor Ali
Noor Ali
OAOmar Al-Jubouri
Omar Al-Jubouri
MAMuhammad Al-Timimi
Muhammad Al-Timimi
Bahaa AbbasBahaa Abbas
Bahaa Abbas
The compounds of LiCoO2 (LCO) and LiCo1-xNixO2 (LCNO), with (x=0,0.25,0.5,0.75,1) were synthesized as cathode active material for lithium–ion batteries using hydrothermal technique in this study. Structure and morphology characterization were conducted for all prepared samples. The crystalline results indicate that both LCO and LCNO possess a rhombohedral structure, while the morphology results show irregular shapes. Electrochemical tests were carried out for LiCoO2 and LiCo0.25 Ni0.75O2 samples only. From the electrochemical measurements, the LiCo0.25 Ni0.75O2 demonstrate higher charge and discharge capacities compared to the LiCoO2 electrode, findings which are consistent with the electrochemical impedance spectroscopy (EIS) results. The X-ray diffraction (XRD) results of both the prepared Lithium Cobalt Oxide (LCO) and Lithium Cobalt Nickel Oxide (LCNO) samples reveal characteristic peaks at specific angles (2θ) indicating crystallographic planes. For LCO, peaks were observed at 18.96°, 37.40°, 38.35°, 39.07°, 45.29°, 49.45°, and 59.62° corresponding to crystallographic planes (003), (101), (006), (012), (104), (015), and (107) respectively. These peaks confirm the formation of a rhombohedral LiCoO2 nanostructure with space group (R-3m no.166), consistent with standard data (JCPDS 00-016-0427). The EDX spectra of the synthesized Lithium Cobalt Oxide (LCO) and Lithium Cobalt Nickel Oxide (LCNO) were analyzed. The results showed the presence of oxygen (O), cobalt (Co), and nickel (Ni) elements. However, the peak corresponding to lithium (Li) was not visible due to its low activation energy. Finally, the synthesis and characterization of LiCoO2 (LCO) and LiCo1-xNixO2 (LCNO) compounds were conducted, with electrochemical tests indicating superior performance of LiCo0.25 Ni0.75O2 over LiCoO2

30 April 2025 in Academic Science Journal
Verified
Journal Article
Open access
PDF file
NANoor Mohammed Ali
Noor Mohammed Ali
MAM. H. Al-Timimi
M. H. Al-Timimi
OAOmar A. Al-Jubouri Al-Jubouri
Omar A. Al-Jubouri Al-Jubouri
HHHuda T. Homad
Huda T. Homad
ELEsmaeil Jalali Lavasani
Esmaeil Jalali Lavasani
This research involved the production of the spinel compound LiMn2O4 as the cathode active substance for Li-ion cells using the hydrothermal method. The field-emission scanning electron microscope (FESEM) was employed for an evaluative analysis of the external surface morphology of the synthesized material. The crystal structure of the spinel material was confirmed using X-ray diffractometry (XRD). The XRD graph exhibited no signs of impurity peaks, confirming a singular crystal structure phase. As per the Scherrer equation, the crystal size was estimated at 12.65 nm. The energy-dispersive X-ray spectroscopy (EDX) spectra for the equipped sample showed the existence of manganese and oxygen, and the concentrations were very close to the elemental composition used. Electrochemical attributes were investigated through galvanostatic charge–discharge (GCD) cycling and cyclic voltammetry (CV) in a specific voltage range. The LiMn2O4sample displayed a charge capacity of 111.6 mAhg-1 and a discharge capacity of 109.9 mAhg-1. The Coulombic efficiency exhibited by this electrode was 98.4%. After 100 cycles, the capacity retention was as high as 57.1%. The electrochemical impedance spectroscopy (EIS) measurements of the LiMn2O4 electrode, including the electrolyte bulk resistance (Rs), charge transfer resistance (Rct), and Warburg Impedance (Wo), were 8.1 ohms, 127.5 ohms, and 0.86 ohms, respectively.

1 October 2025 in Academic Science Journal
Verified
Journal Article
Open access
PDF file
HHH. T. Homad
H. T. Homad
OAO. A. Al-Jubouri
O. A. Al-Jubouri
NANoor M. Ali
Noor M. Ali
MAMuhammad Hameed Al-Timimi
Muhammad Hameed Al-Timimi
The LiCo0.25Ni0.75O2 compound was prepared by a citric-urea combustion rout in this study. the study presented a comprehensive analysis of the decomposition process and formation of metal oxides in LiCo0.25Ni0.75O2 sample using Thermogravimetric Analysis (TGA), Crystalline structure and surface morphology of the prepared powder are investigated by (XRD) and (FESEM). The results of the XRD patterns for LiCo0.25Ni0.75O2 sample show high intensity peaks that indicated a good crystallinity with the Calcination Temperature, while the morphology results show indicates that sample was in the nanostructure dimensions. Electrochemical measurements showed The capacity of the charging and discharging were of 177.6 mAhg-1 and 166.9 mAhg-1 delivered by the LiCo0.25Ni0.75O2 cathode. Likewise, a columbic efficiency of 93.9% was obtained for the cathode.