21 January 2024 in Measurement
25 February 2025 in IEEE Internet of Things Journal
The cooperative localization of radio-based distance measurement is one of the methods to effectively suppress the nonline of sight (NLOS) ranging errors and as a complement to visual/global navigation satellite system (GNSS) localization for unmanned aerial vehicle (UAV) in GNSS challenging or denied environments due to its motility. Target localization can be regarded as a special case of cooperative localization. Meanwhile, the UAV can be considered as a ranging node when the ranging terminal is rigidly mounted on the UAV. To improve the target localization accuracy, the optimal deployment of anchor UAVs is one of the factors we consider when the noise characteristics are different. In this paper, the range-dependent noise in a real flight environment is considered and modeled separately according to the difference in noise characteristics. Subsequently, based on this correlation model, the Fisher information matrix (FIM) and a cost function derived from the A-optimal criterion are provided. Finally, the optimal deployment conditions and the minimum mean square error (MMSE) can be derived by minimizing the cost function as the objective. Through simulation and localization experiments, the validity of the optimal deployment conditions and the corresponding MMSE are verified. Meanwhile, it is concluded that when the noise is range-dependent, it will not affect the optimal deployment result but will significantly change the value of MMSE.
17 April 2023 in IEEE Transactions on Instrumentation and Measurement
The classic propagation model of received signal strength (RSS) measurement is significantly affected by the environment. This paper divides the error sources of RSS ranging into three parts and deals with them in different methods. First, considering the influence of UAV pose on RSS, the compensation model is established through Gaussian Process Regression (GPR) for the first time by mapping the quaternion of the UAV and the attenuation caused by the influence of anisotropy on the antenna in the corresponding the special orthogonal group SO (3). On this basis, the distribution of random compensation variables is derived by unscented transformation (UT) and covariance propagation. Besides, a polynomial function is employed for fitting the distance-dependent environment noise. Then, to deal with the RSS measurement instability caused by the environment noise and the uncertainty of compensation, the adaptive Kalman filter (AKF) is introduced. Finally, an UWB-based environmental adaptive algorithm (UEAA) is proposed to improve ranging precision by using the UWB device in a dynamic environment. By setting the threshold parameter, the UEAA enables the classic RSS ranging model to have a certain adaptive ability for the dynamic environment of UAV, which significantly reduces the error caused by model parameter mismatch. Several experiments are carried out on the UAV platform, and the results show that the improvement of the RSS propagation model is adequate.
21 July 2025 in IEEE Transactions on Instrumentation and Measurement
Due to the complementarity between LiDAR point clouds and images, fusing LiDAR data can significantly enhance the accuracy and robustness of visual simultaneous localization and mapping (SLAM) systems. Cameras are smaller and less expensive than LiDAR, making them easier to deploy. Building on these properties, we propose a novel depth map-assisted monocular visual-inertial odometry (DM-VIO) that fuses image and LiDAR data through the reuse of prior LiDAR depth maps. Existing monocular visual SLAM methods often suffer from inaccurate depth estimation, while many LiDAR-based depth estimation methods fail to fully leverage depth variation. To address this, we propose a depth estimation method based on radial basis function (RBF) interpolation. Local point clouds, extracted from the prior depth map near visual features, are projected onto two principal directions using principal component analysis (PCA). The compressed point clouds are then used to construct interpolation functions to estimate the depth of visual features. Additionally, we introduce a visual-LiDAR fusion constraint method. This method uses semantic information from images to track associations among LiDAR point clouds projected onto images. Experimental results demonstrate that the proposed method significantly improves the accuracy and robustness of monocular visual-inertial odometry, especially in challenging environments such as low-light and large-scale outdoor scenarios.
7 February 2025 in Measurement
11 September 2024 in IEEE Transactions on Instrumentation and Measurement
Low-cost radio-based distance measurement devices, (like) such as ultrawideband (UWB) and Zigbee, are limited by transmission power and environmental noise interference, resulting in bias due to variations in the angles between paired devices. Considering the impact of UAV attitude on this measurement bias, a compensation model using Gaussian Process Regression (GPR) is established first, by mapping the two pseudo-Euler angles under the defined p-frame and the corresponding measurement bias. We take the UAV swarms as an example to deduce the relationship between the UAV quaternion and two pseudo-Euler angles, including the mean and the variance. Based on the GPR compensation model, a Gaussian process regression-based multi-target orientation compensation algorithm (GPRMOCA) is proposed to solve the measurement bias problem in multitarget positioning. The algorithm allows us to calculate the corresponding compensation and its uncertainty for distance measurement between the target and each anchor. Importantly, this algorithm is not limited to UAVs but applies to various scenarios, including indoor positioning. Several experiments on a UAV platform to validate the effectiveness of our proposed method. We find that there are two bias peaks when the device rotates 360 degrees, and the proposed algorithm has a better effect for correcting the deviation of the peak.