This study deals with the influence of the addition of vanadium and niobium with concentrations of 1.2% and 0.14%, respectively, on the variation of the microstructure, and the tribological behavior of an AISI309 austenitic stainless steel. The studied specimens were structurally characterized by optical microscopy, scanning electron microscopy (SEM) X-ray diffraction and and differential scanning calorimetry (DSC). These samples were also subjected to a tribological study using the friction wear test. The results show that the addition of vanadium and niobium causes a precipitation of stable carbides (VC, NbC) which in mm causes a decrease of the chromium carbide precipitation rate. Tribological test results have also shown that the addition of these two elements improves the wear resistance of AISI309 austenitic stainless steel by decreasing the coefficient of friction fr om 0.824 to 0.554.
1 March 2021 in Journal of Physics: Conference Series
The corrosion behaviour of X80 steel samples rolled and other quench-tempered in 3.5% NaCl have been studied. Optical microscopy, scanning electron microscopy, potentiodynamic polarization tests and electrochemical impedance measurements are the techniques used to characterize the samples. The results show that the tempered steel has a low corrosion current density compared to the rolled steel. The impedance measurements show the presence of a single capacitive loop attributed to the load transfer phenomenon.
31 July 2015 in International Review of Civil Engineering (IRECE)