1 November 2013 in Journal of Materials in Civil Engineering
The objective of this study is to evaluate the rheological properties and chemical bonding of nano-modified asphalt binders blended with nanosilica. In this study, the nanosilica was added to the control asphalt at contents of 4% and 6% based on the weight of asphalt binders. Superpave binder and mixture tests were utilized in this study to estimate the characteristics of the nano-modifed asphalt binder and mixture. The rotational viscosity (RV), dynamic shear rheometer (DSR), bending beam rhometer (BBR), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), asphalt pavement analyzer (APA), dynamic modulus (DM) and flow number (FN) tests were used to analyze rheological properties and chemical bonding changes of the nano-modified asphalt binder and the performance of the nano-modified asphalt mixture. In addition, the performance of nano-modified asphalt after rolling thin-film oven (RTFO) short-term and pressure-aging vessel (PAV) long-term aging was assessed as well...
1 January 2012 in Journal of Transportation Engineering
The objectives of this paper are (1) to characterize the mechanical properties of porous asphalt pavement mixtures containing reclaimed asphalt pavement (RAP) and a WMA additive (Advera® WMA) using Superpave™ gyratory compactor and dynamic modulus testing. Four types of porous asphalt mixtures were evaluated in this study. They are 1) control mixture, a conventional porous asphalt mixture; (2) porous asphalt mixture with WMA additive (Advera® WMA in this case); (3) porous asphalt mixture containing 15% reclaimed asphalt pavement (RAP); and (4) porous asphalt mixture containing 15% RAP and additional WMA additive. This study evaluated compaction energy index (CEI), permeability, indirect tensile strength, and dynamic modulus ( E* ) for all types of porous asphalt mixtures. All of the porous asphalt mixtures meet the typical minimum coefficient of permeability in this study. Compaction energy required for the WMA containing 0.25% Advera® WMA was found to be lower compared with the control mixture (HMA). The...
1 January 2011 in Journal of Transportation Engineering
This paper presents a comparative study of laboratory results of both dynamic modulus testing and field rutting performances of hot-mix asphalt (HMA) in the state of Michigan. Fourteen field-produced mixtures at various traffic levels and aggregate sizes were evaluated and compared to those of field rutting. These mixtures were collected from job sites and compacted with a Superpave gyratory compactor to imitate the common air void level used in Mich., which is 7%. Dynamic modulus E∗ was measured at temperatures ranging from −5 to 39.2°C and frequencies ranging from 0.1 to 25 Hz. The results show that the dynamic modulus values increased when the designed traffic level for HMA mixtures increased. The field rutting performance was evaluated based on theoretical pavement rutting life index. Two parameters, | E∗ | and | E∗ | /sin (φ) , were compared to the theoretical pavement rutting index. Based upon the preliminary study, it was found that E∗ was a suitable parameter in comparing the field and laboratory ...