23 January 2019 in Eastern-European Journal of Enterprise Technologies
Development of the method for rapid detection of hazardous atmospheric pollution of cities with the help of recurrence measures
29 February 2020 in Eastern-European Journal of Enterprise Technologies
A method for preventing the emergency resulting from fires in the premises through operative control over a gas medium
31 October 2021 in Eastern-European Journal of Enterprise Technologies
Detection and recognition of objects in images is the main problem to be solved by computer vision systems. As part of solving this problem, the model of object recognition in aerial photographs taken from unmanned aerial vehicles has been improved. A study of object recognition in aerial photographs using deep convolutional neural networks has been carried out. Analysis of possible implementations showed that the AlexNet 2012 model (Canada) trained on the ImageNet image set (China) is most suitable for this problem solution. This model was used as a basic one. The object recognition error for this model with the use of the ImageNet test set of images amounted to 15 %. To solve the problem of improving the effectiveness of object recognition in aerial photographs for 10 classes of images, the final fully connected layer was modified by rejection from 1,000 to 10 neurons and additional two-stage training of the resulting model. Additional training was carried out with a set of images prepared from aerial photographs at stage 1 and with a set of VisDrone 2021 (China) images at stage 2. Optimal training parameters were selected: speed (step) (0.0001), number of epochs (100). As a result, a new model under the proposed name of AlexVisDrone was obtained. The effectiveness of the proposed model was checked with a test set of 100 images for each class (the total number of classes was 10). Accuracy and sensitivity were chosen as the main indicators of the model effectiveness. As a result, an increase in recognition accuracy from 7 % (for images from aerial photographs) to 9 % (for the VisDrone 2021 set) was obtained which has indicated that the choice of neural network architecture and training parameters was correct. The use of the proposed model makes it possible to automate the process of object recognition in aerial photographs. In the future, it is advisable to use this model at ground stations of unmanned aerial vehicle complex control when processing aerial photographs taken from unmanned aerial vehicles, in robotic systems, in video surveillance complexes and when designing unmanned vehicle systems
1 January 2022 in Problems of Emergency Situations
Обґрунтовано вибір пріоритетного показника якості поверхневої води для інтегральної оцінки екологічного стану Дніпровського водосховища. Використано процедуру отримання комбінаторного індексу забруднення води, проаналізовано багаторічну динаміку основних забруднювачів Дніпровського водосховища. Розрахунок значення комбінаторного індексу забрудненості води та відносна оцінка екологічного стану поверхневих вод проводилися у два етапи: спочатку за кожною окремою досліджуваною речовиною і показником екологічного стану поверхневих вод, потім розглядався одночасно весь комплекс забруднюючих речовин та виводилася результуюча оцінка. Це зроблено для мінімізації витрат та зусиль при проведенні моніторингу поверхневих вод у звичайних (неаварійних) умовах. В результаті досліджень встановлено, що якість води нижче за течією має більш високі значення комбінаторного індексу забрудненості води, що обумовлено значним антропогенним впливом на водний об’єкт. Встановлено кореляційний зв’язок між комплексним індексом забруднення води та показником біохімічного спожи-вання кисню. Визначено пріоритетний показник для інтегральної оцінки екологічного стану водного об’єкту – БСК5 через тісний зв'язок з величиною комплексного індексу забрудненості води. Коефіцієнт кореляції між вказаними значеннями складає від 0,92 до 0,96. Зв'язок, що існує між величиною комбінаторного індексу забрудненості води і величиною біохімічного споживання кисню, робить показник біохімічного споживання кисню важливим для інтегральної оцінки забруднення вод різними органічними речовинами. Тому в якості пріоритетного показника для характеристики стану водотоку та проведення оперативного моніторингу, обрано показники кисневої характеристики. Ці дані є корисними та важливими, оскільки дозволять оптимальніше використовувати обмежені ресурси при здійсненні моніторингу поверхневих вод та покращити управління басейном річки.
18 June 2021 in Eastern-European Journal of Enterprise Technologies
This paper reports a study into the dependence of efficient glycerate potassium production involving glycerin and potassium hydroxide solution on the process conditions. The concentration of potassium glycerate in the resulting product has been used as a parameter of the efficient glycerate potassium production process. Glycerates of metals are applied to produce articles in the construction industry, electronics, medicine; they are employed as transesterification catalysts to obtain special fats for various purposes, as well as biodiesel fuel. In order to derive potassium glycerate, heating was applied while agitating a mixture of glycerin and potassium hydroxide. The analysis of potassium hydroxide was performed, in which the basic substance mass fraction was 85.5 %, the mass fraction of carbonate potassium – 0.9 %. The p.a.-grade glycerin was applied in this work, whose basic substance mass fraction was 99.5 %. The effect of the heating temperature of the reaction mixture on the concentration of potassium glycerate in the product has been determined. It has been shown that the rational heating temperature is 145 °C. The dependence of potassium glycerate concentration in the resulting product on the following conditions of the process has been established: a change in the molar concentration of glycerin and a reaction mixture heating duration. Such rational conditions for obtaining potassium glycerate have been defined as a molar concentration of glycerin of 60 % and a heating duration of 4 hours. The experimentally established concentration of potassium glycerate in the product under these conditions was 75.77 %. For potassium glycerate, the melting point (69 °C) and the mass fraction of moisture (0.8 %) have been determined. The results of experimental studies would make it possible to obtain potassium glycerate directly at enterprises where the glycerates of metals are used, from available raw materials, under rational conditions. The defined conditions for obtaining potassium glycerate could make it possible to efficiently utilize material and energy resources.