28 January 2015 in Journal of Materials Chemistry A
The appearance of colossal permittivity (CP) materials broadens the choice of materials for energy-storage applications. Here we report colossal permittivity in ceramics of TiO2 co-doped with niobium and trivalent cation {i.e., (A0.5Nb0.5)xTi1−xO2, A = Bi, Pr, Dy, Sm, Gd, Yb, Ga, Al or Sc}, in particular in the (Bi0.5Nb0.5)xTi1−xO2 ceramic system that was selected as a candidate material. A very large dielectric constant (εr ∼ 4.2 × 104) and a low dielectric loss (tan δ ∼ 8.3%) were observed for (Bi0.5Nb0.5)xTi1−xO2 ceramics when measured at 1 kHz. Moreover, the addition of Bi and Nb can enhance the temperature stability (between −125–200 °C) and frequency stability (between 102 to 106 Hz) of εr and tan δ. The electron-pinned defect-dipoles are considered to be responsible for both their high εr and low tan δ, which is consistent with changes of valence states determined by X-ray photoelectron spectroscopy. We believe that the TiO2 ceramics as a CP material constitute one of the most promising candidates for high-energy-density storage applications.
1 January 2016 in Acta Materialia
3 August 2015 in Journal of Materials Chemistry C
In this study, colossal permittivity (CP) (10 4 –10 5 ) is attained in the (Sm 0.5 Ta 0.5 ) x Ti 1−x O 2 ceramics, and their dielectric loss can be further decreased by doping oxides and optimizing the sintering temperatures.
7 March 2019 in Journal of Materials Chemistry C
We decode the role of trivalent acceptors and pentavalent donors on dielectric properties and defect structures in TiO2 CP ceramics.
1 June 2017 in Journal of Materiomics
Here, we developed one kind of novel TiO2 ceramics with colossal dielectric constant by chemical modifications (Bi3+ and Sb5+), and discussed the physical origin for giant dielectric constant. Effects of Bi and/or Sb on their microstructure, dielectric properties as well as its frequency and temperature stability were studied in detail. It was found that their dielectric properties are strongly sensitive to (Bi,Sb) contents, and colossal dielectric permittivity (CP) (104∼105) together with low dielectric loss (∼5.7%) can be obtained in a wide composition range. In addition, all the ceramics possessed good frequency (102∼106 Hz) and temperature (−150–200 °C) stability of dielectric properties. In addition, the defects caused by the Bi volatilization may be the reason for higher dielectric properties of (Bi0.5Sb0.5)xTi1−xO2 ceramics with respect to (A0.5Sb0.5)xTi1−xO2 (A = In, Pr, Dy, Sm, Gd, Yb, Ga, Al, Fe or Sc). According to the results of complex impedance and XPS, the electron-pinned defect-dipoles may be suitable to explain the CP phenomenon, and oxygen vacancies-induced by Bi3+&Sb5+ substitution for Ti4+ should be responsible for conduction mechanism. We believe that this profound investigation can benefit the development of TiO2 ceramics as a CP material