1 July 2017 in Process Safety and Environmental Protection
20 December 2023 in Engineering Structures
21 August 2020 in Advances in Structural Engineering
The mechanical performance of concrete connection plays an important role in the response of precast concrete structures. Unlike conventional small concrete shear key which is mainly to help with alignment at installation, large concrete shear keys have been often designed in recent engineering practice to improve joint shear resistance. However, the mechanical properties of large concrete shear keys have not been properly studied. This paper utilizes experimental and numerical methods to investigate both direct shear and flexural bending properties of shear keys. Four types of shear keys comprised of trapezoidal shape, semi-spherical shape, dome shape and wave shape are investigated, which are found to strongly influence the mechanical properties of the keyed joint. Laboratory shear test found unlike conventional shear key, with increased tenon size failure moves to concrete mortise. A detailed numerical model is built to help understand stress developed at the key joint. Flexural bending tests are carried out to evaluate the flexural bending properties of these key joints. Through comparing with theoretical derivation for plain flat joint, similar bending moment resistances from the keyed joints are measured with that of plain flat joint, but larger rotation angles are recorded probably because more damages at the key joint. Among the four different joint patterns, shear key with smoothed pattern could effectively relief concrete damages.
1 November 2015 in Materials & Design
1 February 2018 in Earthquake Spectra
This paper presents the identification of the instantaneous modal properties and the experimental response of a full‐scale, five‐story base‐isolated RC building tested on a shake table. A suite of earthquake motions of various intensities was applied to the building to progressively increase the seismic demand. The deterministic‐stochastic subspace identification method is employed to estimate the variations of the modal properties of the building by employing a short‐time windowing approach. The changes of the modal parameters during the seismic motions are tracked and analyzed. Observed and measured responses of the structure are analyzed and correlated with the variation of the identified modal parameters. The nonlinear behavior of the isolators generates the variation of the identified natural frequencies and equivalent damping ratios of the building, which change in agreement with the input motion intensity. A high correlation between the effective stiffness of the isolators and the instantaneous frequency of the first mode is found. The effective damping ratio of the isolation system and the instantaneous damping ratio of the fundamental mode of the building are highly correlated.