11 October 2019 in Nanotechnology
Lithium-sulfur (Li/S) batteries are promising portable energy storage devices if the defects of insufficient conductivity and obvious shuttle effect can be effectively suppressed. In this work, a unique caddice-like ball carbon nanotubes/CoO (CNTs/CoO) microspheres have been synthesized through a facile spray drying and following calcination method. By using cobalt acetate (Co(CHCOO) 2 ) as a cobalt source, polymethyl methacrylate (PMMA) as a pore former and CNTs as the supporting frame, the as-prepared CNTs/CoO microspheres endowed with enriched interconnected pores and abundant scattered CoO nanoparticles on CNT walls. CNTs provided physical adsorption platforms for adsorption of polysulfides while ensuring the conductivity of the overall material. Polycrystalline CoO nanoparticles are uniformly deposited on CNT walls, providing additional confinement of polysulfides by strong chemical adsorption. In addition, the different content of CoO in the microspheres was regulated by the amount of added cobalt source during the preparation process. With both physical entrapment by CNTs and strong chemical interaction with CoO nanocrystals, this unique design can effectively promote the active material utilization and inhibit the shuttle effect. When employed as the sulfur host, an excellent electrochemical performance was achieved on the resulting sulfur-impregnated CNTs/CoO (S-CNTs/CoO) composite with the sulfur content of 73.0%. The obtained S-CNTs/CoO microspheres delivered an exceptional initial discharge capacity of 1340 mAh g −1 and a prominent cycling stability of 1116 mAh g −1 after 100 cycles at 0.2 C, as well as a superb rate capability of 600 mAh g −1 and 506 mAh g −1 at 2.0 C and 3.0 C, respectively. The results revealed that the S-CNTs/CoO composite was an enviable cathode material and showed an excellent potentiality in the application of Li/S batteries.
31 July 2023 in Research in Astronomy and Astrophysics
A large, fully steerable radio telescope is susceptible to the wind load, leading to structure deformation and pointing deviation of the telescope. To effectively suppress the influence of dynamic wind load, the wind resistance control of the telescope is carried out based on wind speed forecasting. This study developed a wind speed forecasting model to efficiently forecast the wind speed at the telescope position. The proposed model successfully eliminates the random noise of the original wind speed, effectively extracts the wind speed features and solves the automatic optimization of the hyperparameters of the forecasting network. This model significantly improves the accuracy and reliability of wind speed forecasting. To verify the forecasting performance of the proposed model, the wind data from the Qitai Radio Telescope site is examined as a case study. The wind speed forecasting model’s MAE, RMSE and MAPE are 0.0361, 0.0703 and 3.87%, respectively. The performance of the proposed model meets the requirements of wind resistance control and can provide data support for the radio telescope.
13 September 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
With the demand for more powerful functions and miniaturization of electronic equipment, the requirements for complex interconnection design and manufacturing in electronic packaging are increasing. The pros and cons of interconnection configuration have a serious impact on its electrical performance, and have become a key factor affecting the development of complex interconnection in electronic packaging. In order to better study the influence mechanism of the configuration parameters of lead interconnection, a method for predicting the electrical performance of lead interconnection in electronic packaging based on configuration characteristics is presented. First, the configuration parameters of lead interconnection are extracted, then the parameterized characterization of lead interconnection is carried out. Taking the half-envelope rectangular lead interconnection as an example, the road coupling model of lead interconnection based on range analysis, variance analysis and response surface method is built and experimentally verified. Finally, the influence mechanism of the configuration characteristics of lead interconnect on electrical performance is analyzed. The work carried out provides theoretical guidance for the lead interconnection design and fast prediction of electrical signal transmission performance in electronic packaging.
1 August 2020 in SID Symposium Digest of Technical Papers