This paper presents a simple and straightforward design of a discrete-time fractional-order odd-harmonics repetitive controller (RC). Unlike general RC designs, the proposed method utilizes an internal model with a half-period delay and a stabilizing controller with a fractional phase lead compensator. First, the odd-harmonics internal model representing odd-harmonics frequencies is constructed by using the information of the reference’s basis period and the preferred tracking bandwidth. Secondly, an optimization problem synthesized from the stability condition of the RC closed-loop system is solved to obtain the fractional phase lead compensator. Finally, the fractional term of the stabilizing controller is realized by using a causal and stable infinite impulse response (IIR) filter, where the filter coefficients are computed by applying the Thiran formula. Simulation and experimental validation on a servomotor system are conducted to verify the effectiveness of the proposed design.
In this paper, a discrete-time design of a fractional internal model-based repetitive controller with a sliding mode approach is presented for uncertain linear systems subject to repetitive trajectory and periodic disturbance. The proposed algorithm, named a fractional delay-based repetitive sliding mode controller (FD-RSMC), aims to enhance tracking accuracy, transient response, and robustness against parametric variations beyond what is offered by conventional repetitive controllers. First, a fractional delay-based repetitive controller (FD-RC) that allows the periodic delay steps to be noninteger is presented to improve the trajectory tracking accuracy and good disturbance compensation of multiple periodic signals. Second, a sliding mode control (SMC) with a discrete-time reaching law is systematically incorporated into FD-RC to improve transient response, especially during the learning period of FD-RC, and also to provide system robustness against model uncertainties. Finally, the stability proof of the closed-loop system with the proposed controller is assessed based on a delayed-sliding mode-reaching condition. Finally, comparative simulation studies are presented to demonstrate the superior performance of the proposed controller.
The application of control systems in precision irrigation is critical to ensure the accurate distribution of water in crops under various uncertainties. Shifts in the loading of the water supply on the control valve can be a significant uncertainty. Changes in weather and the uncertainty of the water level in the reservoir are also challenging issues. Sliding Mode Control (SMC) is a robust control technique that is simple to apply to deal with uncertainty, while Fast Terminal Sliding Mode Control (FTSMC) has the benefit of the rapid convergence. The DC electric motor, which is a common component of electric control valves, can be employed in designing control techniques for precision irrigation applications. This study aims to design a proposed experimental-based method, namely FTSMC for valve regulation under water load uncertainty for precision irrigation application. Modification of the signum function should be used to eliminate the chattering effect in real experiments.The results of experiments showed that the proposed method was superior to the conventional Proportional Integral Derivative (PID) and traditional SMC techniques in terms of overshoot, convergence rate and error. Because of those reasons, the FTSMC approach should be implemented on control valves against load uncertainty in precision irrigation applications.
This paper presents a novel design of discrete-time dual internal model-based repetitive control systems. The design strategy is accomplished by combining general and high-order modified repetitive control schemes for simultaneous tracking repetitive tasks and rejection of uncertain periodic disturbances. The proposed controller is constructed from two different discrete-time internal models, rendering a dual internal model-based repetitive controller (DIMRC). The first internal model is intended to track repetitive commands with a fixed fundamental frequency. Meanwhile, the second internal model is coupled to compensate for an exogenous periodic disturbance with an uncertain frequency. The controller structure, stability conditions, and convergence analysis are discussed in this paper. The performance of the proposed controller is validated through simulation studies showing accurate tracking and excellent disturbance rejection simultaneously.
25 December 2023 in Journal of Robotics and Control (JRC)
Functional electrical stimulation (FES) is a medical device that delivers electrical pulses to the muscle, allowing patients with spinal cord injuries to perform activities such as walking, cycling, and grasping. It is critical for the FES to generate stimuli with the appropriate controller so that the desired movements can be precisely tracked. By considering the repetitive nature of the movements, the learning-based control algorithms are utilized for regulating the FES. Iterative learning control (ILC) and repetitive control (RC) are two learning algorithms that can be used to accomplish accurate repetitive motions. This study investigates a variety of ILC and RC designs with distinct learning functions; this constitutes our contribution to the field. The FES model of ankle angle, which is in a class of discrete-time linear systems is considered in this study. Two learning functions, i.e., proportional, and zero-phase learning functions, are simulated for the second-order FES model running at a sampling time of 0.1 s. The results indicate the superior performance of the ILC and RC in terms of convergence rate using the zero-phase learning function. ILC and RC with a zero-phase learning function can reach a zero root-mean-square error in two iterations if the model of the plant is correct. This is faster than proportional-based ILC and RC, which takes about 40 iterations. This indicates that the zero-phase learning function requires two iterations to ensure that the patient's ankle angle precisely tracks the intended trajectory. However, the tracking performance is degraded for both control methods, especially when the model is subject to uncertainties. This specific problem can lead to future research directions.
A Web-Based Rain Gauge Calibrator (WBRGC) is a rain gauge calibrator where the calibration result can be downloaded from a specific web as soon as the WBRGC finish the calibration process. This study aimed to design and implement three application software, namely data logger, display, and web application software used in WBRGC. This study was carried out by assessing their performances during the implementation of three application software along a calibration process. The data from fieldwork, namely ambient temperature, ambient humidity, water temperature, calibration duration, and the number of tipping, is sent by the data logger unit to the web unit through the display unit. The result shows that the software worked well for data transfers between the data logger application software and the display application software; and between the display application software and the web application software. It means that all software can operate well to run the WBRGC according to its function.