This research focuses on designing an energy storage system using phase change material (PCM) in the air-conditioned zone, integrated with an air handling unit (AHU). The proposed system introduces a novel approach to reducing energy consumption in buildings by incorporating a solar heating coil and PCM. Through detailed energy and exergy analyses, the study evaluates the AHU’s performance and optimises the thickness and position of the PCM layer using genetic algorithm (GA) optimisation. Simulation of the proposed system was conducted using ASPEN Hysys and MATLAB software. Results demonstrate that integrating PCM reduces heat exchange by 687 kWh and optimising the PCM layer further improves system efficiency. Implementing a solar system decreases irreversibility by 7.3% compared to an AHU without solar integration, with a more significant reduction of 12.49% observed during hot months. Overall, the total irreversibility is reduced by 8%, with the solar system contributing to 80.6% of the irreversibility. These findings highlight the combined effect of PCM optimisation and solar integration in enhancing the energy and exergy performance of AHU systems.
One of the most effective methods for thermal energy storage relies on the latent heat property of phase change materials (PCMs). Fins are widely employed as an efficient technique to enhance heat transfer. However, precise modeling of the freezing process remains challenging due to the dynamic nature of the phase change boundary. This study introduces a novel semi-analytical approach based on Green’s function to investigate the impact of radial and longitudinal fins on the freezing process within cylindrical thermal energy storage tanks under time-dependent first and third type boundary conditions. Unlike previous studies that primarily focused on steady-state conditions or simplified geometries, this research provides a more realistic and comprehensive analysis of transient thermal behavior. The findings reveal that while fins initially accelerate freezing, their effectiveness diminishes over time due to thermal resistance effects. Radial fins consistently outperform longitudinal fins, reducing total freezing time by up to 75.31% and demonstrating a 19.68% efficiency improvement. These results offer new insights for optimizing the design of thermal energy storage systems, particularly in applications requiring efficient cold energy storage under varying boundary conditions.