26 February 2019 in Beilstein Journal of Organic Chemistry
This article describes the development and manufacturing of lab equipment, which is needed for the use in flow chemistry. We developed a rack of four syringe pumps controlled by one Arduino computer, which can be manufactured with a commonly available 3D printer and readily available parts. Also, we printed various flow reactor cells, which are fully customizable for each individual reaction. With this equipment we performed some multistep glycosylation reactions, where multiple 3D-printed flow reactors were used in series.
5 June 2020 in Reaction Chemistry & Engineering
This paper presents the development of milli- and microfluidic reactors made of polyether ether ketone (PEEK) and 3D-printed equipment for a complete continuous flow system.
22 March 2023 in Journal of Flow Chemistry
In this work, we introduce a low-cost open-source flow system that includes a dual syringe pump with implemented pressure sensor and back pressure regulator. The entire system can be built for around 500 €. Commercially available flow systems can be very expensive with equipment starting at, but often greatly exceeding, 10,000 €. This high price of entry makes such technology prohibitively expensive for many research groups. Such systems stand to benefit the emerging academic pharmaceutical field by providing the experience and availability of reliable and affordable solutions. To implement accessible flow chemistry at research facilities, the systems must be made affordable. In addition, space in research laboratories is usually limited and commercially available flow systems can be very bulky. Having a compact and individually adjustable system is thus beneficial, with 3D printing technology offering the solution. Our compact 3D-printed system meets the needs of many applications in flow chemistry research as well as educational requirements for universities. As a proof of concept, we conceptualized, developed, and tested a custom flow system that can be used to synthesize [18F]2-fluoro-2-desoxy-d-glucose ([18F]FDG), the most commonly used PET-tracer. This system was designed to perform the typical functions and operations required in radiotracer production i.e. radiofluorination, dilution, SPE-trapping, deprotection, and SPE-elution. With this proof-of-concept in hand, the system can be easily customized to produce other radiopharmaceuticals. Graphical Abstract
28 December 2023 in Journal of Labelled Compounds and Radiopharmaceuticals
One of the key strategies for radiochemical research facilities is the automation of synthesis processes. Unnecessary manual operations increase the radiation exposure of personnel, while simultaneously threatening the reliability of syntheses. We have previously reported an affordable open-source system comprising 3D-printed continuous flow reactors, a custom syringe pump, and a pressure regulator that can be used to perform radiofluorinations. In this paper, we address additional essential processes that are needed for radiotracer development and synthesis, with the aim of making laboratory work safer and research more efficient. We have designed and evaluated a fully automated system for rapidly and effectively processing and drying aqueous [F-18]fluoride that can be directly connected to the cyclotron. This process relies on triflyl fluoride gas generation and allows nucleophilic [F-18]fluoride to be prepared safely in a hotcell within 10 min and an activity recovery of 91.7 +/- 1.6% (n = 5). Owing to the need for convenient radiofluorinated prosthetic ligands, we have adapted our continuous flow system to produce [F-18]fluoroethyl tosylate (FEOTs) and [F-18]fluoroethyl triflate (FEOTf), prosthetic groups that are widely used for late-stage fluoroethylation of PET tracers. The processes as well as the radiolabeling of different groups are compared and comprehensively discussed. Having a method providing [F-18]fluoroethyl tosylate (FEOTs) as well as [F-18]fluoroethyl triflate (FEOTf) quickly and highly efficiently is beneficial for radiochemical research.
5 July 2024 in Journal of Open Hardware
Column chromatography and the subsequent analysis of the collected fractions using thin-layer chromatography (TLC) are immensely popular and frequently used methods in organic chemistry. To analyze the fractions, they have to be spotted onto the TLC plates, which can be a time-consuming task. Therefore, we have developed an automatic spotting device based on a conversion of a 3D printer kit, which could be easily built for around 500 €. All parts come directly from the 3D printer kit, are 3D printed, or are commercially available, such as syringes and tubing. In this manuscript, we describe the design and use of the spotting device. In addition, we provide a detailed step-by-step assembly instruction and all CAD files for easy replication.
23 December 2010 in Synlett
Olefination of ester 26 which was obtained from acid 20 and alkenol 25 using a reduced titanium ethylidene reagent led to cyclic enol ether 28 which could be cyclized by iodospiroacetalization to the spiroacetal core of the antifungal compound spirofungin A (5).