5 March 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
It is known that blending oxygenated fuels to gasoline can increase knock resistance of the fuel and reduce exhaust emissions. In this experimental research, ethyl acetate as a new and renewable oxygenated fuel which is produced through the reaction of ethanol with acetic acid was added to base gasoline at 5% (E5) and 10% (E10) volume ratios to investigate its effect on engine performance and exhaust emissions. For this, a single-cylinder and four-stroke SI engine was utilized, and engine experiments were carried out under low, medium, high and full load at a constant engine speed of 1500 rpm. The potential for the ethyl acetate as oxygenated fuel was also further investigated by distillation tests. In addition, a fuel cost analysis based on brake specific fuel consumption and fuel price was performed. Results revealed that E5 and E10 displayed superiors in terms of CO and HC emissions to base gasoline. It was determined that oxygen content in ethyl acetate led to decrease in CO and HC emissions by 54.5% and 50.1%, respectively. However, NOX emissions dramatically increased by 81.1% with fuel blends operation and engine performance parameters such as brake specific fuel consumption (BSFC) and brake thermal efficiency (BTE) deteriorated. Furthermore, the fuel economy analysis showed that 5 vol.% and 10 vol.% ethyl acetate blends with base gasoline presented averagely 38.9% and 84.5% higher fuel cost relative to gasoline.
17 March 2020 in International Journal of Thermophysics
22 March 2021 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
This paper aims to reduce the exhaust emissions of a gasoline engine by conditioning the engine intake air. The oxygen enrichment of inlet air to reduce the HC and CO emissions and humidifying the inlet air to control NOX emissions was applied. The intake air oxygen concentration was increased from 21% to 25% by 2% interval. The oxygen enrichment of the engine inlet air increased the combustion rate, and thus combustion improved, and thermal efficiency increased. This situation led to a reduction in HC emissions and CO emissions. However, the combustion improvement caused a striking rise in NOX emissions because of the high cylinder temperature and high oxygen concentration. This undesirable effect was tried to be alleviated by adiabatic humidification of the engine inlet air. For this purpose, the relative humidity of the intake air was increased from 35% to 65% before and then to 85%. For this, the intake air passed through the conditioning chamber, the dry thermometer temperature lowered by 4 °C for a relative humidity of 85% thanks to the evaporative cooling of water. The results showed that oxygen enrichment caused a 13.5% and 9.3% increase in thermal efficiency in order of half and full load. The humidification method resulted in a 14.3% and 18.3% decrease in thermal efficiency for half and full load. The results also showed that the humidification method could only control NOX increment generated at half load and 23% oxygen condition.
12 November 2025 in Arabian Journal for Science and Engineering