Berezikov Nikolay

Berezikov Nikolay

Auto-generated profile, based on publicly available information

Berezikov Nikolay

Tomsk Polytechnic University, Tomsk, Russia

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
AGAlexander Gorshkov
Alexander Gorshkov
NBNikolay Berezikov
Nikolay Berezikov
AKAlbert Kaltaev
Albert Kaltaev
SYStanislav Yankovsky
Stanislav Yankovsky
KSKonstantin Slyusarskiy
Konstantin Slyusarskiy
KLKirill Larionov
Kirill Larionov
The process of slow pyrolysis of seven nut shell samples, in a nitrogen-purged atmosphere, has been studied, as well as characteristics of biochar obtained. The heat carrier with a temperature of 400–600 °C (with a step of 100 °C) was supplied indirectly using a double-walled reactor. The heating rate was 60 °C/min. At increased temperature of the heating medium, a decrease in the amount of the resulting carbon residue averaged 6.2 wt%. The release of non-condensable combustible gas-phase compounds CO, CH4, and H2, with maximum concentrations of 12.7, 14.0, and 0.7 vol%, respectively, was registered. The features of the obtained biochar sample conversions were studied using thermal analysis in inert (nitrogen) and oxidative (air) mediums at 10 °C/min heating rate. Kinetic analysis was performed using Coats–Redfern method. Thermal analysis showed that the main weight loss (Δm = 32.8–43.0 wt%) occurs at temperatures ranging between 290 °C and 400 °C, which is due to cellulose decomposition. The maximum carbon content and, hence, heat value were obtained for biochars made from macadamia nut and walnut shells. An increased degree of coalification of the biochar samples affected their reactivity and, in particular, caused an increase in the initial temperature of intense oxidation (on average, by 73 °C). While technical and elemental composition of nut shell samples studied were quite similar, the morphology of obtained biochar was different. The morphology of particles was also observed to change as the heating medium temperature increased, which was expressed in the increased inhomogeneity of particle surface. The activation energy values, for biochar conversion in an inert medium, were found to vary in the range of 10–35 kJ/mol and, in an oxidative medium—50–80 kJ/mol. According to literature data, these values were characteristic for lignin fibers decomposition and oxidation, respectively.

1 May 2022 in Coke and Chemistry
Verified
Journal Article
Closed access
PDF file
KLKirill Larionov
Kirill Larionov
NBN. I. Berezikov
N. I. Berezikov
AKAlbert Kaltaev
Albert Kaltaev
AGA. S. Gorshkov
A. S. Gorshkov
The use of metal carbonates to intensify coal ignition and combustion is considered. To coal powder (<0.1 mm fraction), 5 wt % admixtures of Na2CO3,

27 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
SYStanislav Yankovsky
Stanislav Yankovsky
TATolokol’nikov Anton
Tolokol’nikov Anton
BNBerezikov Nikolay
Berezikov Nikolay
GVGubin Vladimir
Gubin Vladimir
In this paper, the properties of ignition of mixed fuel pellets formed on the basis of fairly typical energy coal and wood industry waste in the form of cedar husks are experimentally established. The technical characteristics of the initial fuel components and the mixtures based on them, the ignition delay times for different mass concentrations of biomass in coal, and the composition of flue gases formed during the thermal decomposition of these mixed fuels and their base components were determined. Pellets of mixed fuels were made by a hydraulic press. The experiments were performed in an air environment at temperatures from 600 °C to 800 °C. Recording of the processes of pellet ignition and combustion was carried out using a high-speed video camera with an image format of 1024 × 1024 pixels, and a frame rate up to 500 frames per second. The analysis of the flue gas composition was performed using a Test-1 factory gas analyzer (BONER Co.). It was found that the increase in the share of biomass up to 50% in the mixed fuel led to a significant reduction in the ignition delay time to less than 1 s and the sequestration of sulfur oxide emissions by 37.6% and of nitrogen oxides by 3.8% in the studied granular mixed fuels.