In the fields of biological and medical research, precise detection of microscale structural changes is crucial. This paper presents a microwave sensor based on a microstrip line-coupled split-ring resonator structure for detecting structural bending changes and force conditions. The sensor is composed of Flame-Retardant 4(FR4) epoxy resin, copper foil, and an organic protective layer, with a resonant frequency of 3.60801 GHz. Detection of bending and microforces is achieved through the shift in resonant frequency. When the bending angle is between 0.1° and 1°, the sensor's resonant frequency shift range is from 3.60771 GHz to 3.60280 GHz; when the bending angle is between 5° and 90°, the resonant frequency shift range is from 3.60801 GHz to 3.60126 GHz, with a sensitivity of 74.916 kHz/°. Additionally, the sensor can measure forces in the range of 0 to 20 N, and for microforces within the range of 0.1 mN to 1 mN, the resonant frequency shift range is from 3.56256 GHz to 3.56219 GHz, with a sensitivity of 372 Hz/μN. The sensor has the advantages of high resolution, high sensitivity, and a broad measurement range. Validated by pulse measurement, it successfully measured the wrist arterial pulse force of approximately 1.5 mN, providing a new perspective for the fields of biological and medical monitoring.