3 December 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In this paper, a novel secondary reconfigurable S/SP (R-S/SP) compensation network and parameter design method are proposed. The proposed compensation network can reconfigure the S/SP circuits by switching to implement load-independent constant-current mode (CCM) and constant-voltage mode (CVM), respectively, without the need for communication. The derivation of a generalized design methodology is given in detail based on the two-port network transfer matrix approach. By adjusting the parameter factors, the R-S/SP topology can maintain both the zero-voltage switch (ZVS) characteristic in the Class-D inverter’s wide load range and the stability of the voltage and current gains under misalignment tolerance. Also, the gains are tunable in this topology. Finally, a 0.6 MHz, 108 W inductive power transfer (IPT) prototype is developed with a CVM output of 72 V and a CCM output of 1.5 A. The experimental results show that load-independent switching of CCM and CVM can be implemented. The system can operate at a lateral offset of ±21%, with CCM gain fluctuations of less than 6.8% and CVM gain fluctuations of less than 9.9% over the full impedance range. The ZVS is realized throughout the process, and the system efficiency reaches 91.1% at maximum power.
9 March 2026 in IEEE Transactions on Transportation Electrification
This article presents a novel push-pull differential clamping Class E (PPDC-Class E) inverter and S/SP impedance compression compensation for wireless power transfer (WPT) systems. The proposed inverter incorporates voltage and current stress regulation and voltage-boosting capabilities, enabling configurable low stress levels and high voltage gain. Its auxiliary switches ensure load-independent zero-voltage switching (ZVS) and soft turn-off with minimal power dissipation. Furthermore, a systematic design approach for S/SP compensation is proposed to achieve impedance compression within WPT systems. Through parametric configuration, the voltage stress can be reduced to below $1.5~V_{DC}$ , the minimum current stress can approach $I_{DC}$ , and the AC voltage gain can exceed 3. Furthermore, the proposed S/SP compensation extends the ZVS load range of the inverter’s power switches. Finally, a 1-MHz, 500-W prototype has been constructed, confirming its effectiveness. The results demonstrate that the PPDC-Class E inverter exhibits wide-load-range ZVS operation and boost characteristics, with configurable switching voltage and current stresses through parameter selection. This inverter design achieves a peak efficiency of 97%.
1 January 2026 in IEEE Open Journal of Power Electronics