8 July 2025 in Solar Energy
NCN.V.S. Swamy Chinamilli
23 July 2019 in AIP Conference Proceedings
This paper is focused to compare the two different nickel-based alloys from the experimental results achieved from the micro electrochemical machining (ECM). An Austenitic nickel-chromium based super alloys are used in many applications, namely gas turbine blades, combustors and seals, turbocharger rotors and seals, exchange of heating tubes, automotive industries and pressure vessels, etc. The conventional machining is not suitable for experimentation of Inconel 625 and Inconel 718 alloys, because these alloys are difficult to cut materials. An experimental data’s are extracted from the literatures, if the researchers used same equipment for experimentation and same input parameters. The input parameters is selected for comparison are namely voltage supplied (V), electrolyte concentration (E) of electrolyte and feed rate (F) of the electrode. The major output response of micro ECM is the material removal rate (MRR). The optimum results of MRR value 0.0917 mm3/min is obtained by Inconel 625 alloy at run number 3, i.e., 0.25 moles/lit, 14 volts and 0.06 mm/min. The average MRR value for Inconel 625 alloy and Inconel 718 alloy being 0.06479 mm3/min and 0.06356 mm3/min respectively. The results of the material removal rates of Inconel 625 and 718 alloys from micro ECM are compared.
30 August 2019 in International Journal of Innovative Technology and Exploring Engineering
This paper presents on feeder control; the inoculation device has been designed to automatically add inoculating powder to metal stream working with an automatic pouring unit. This system applies a constant dosage of inoculant easily modified by the control unit, with precise repeatability of the process. It incorporates a system of the instant direction of faults at all times, to ensure proper operation. In this project, the human effort is reduced by automating the inoculant feeding mechanism performed in a foundry. By doing pouring in manual manner, it ends up in reducing the rejection of production 2% owing to poor inoculation which disturbs the company's production. This system is used to feed the inoculant to the molten metal in a highly precise amount as per the requirements. After researching various feeding mechanisms, concluded with feeding machine with the help of screw which is more adoptable for desirable number of inoculants to be transferred. The mathematical analysis has been done and it is proven that satisfies the design criterions for modeling of the proposed system. The mechanical modeling is designed in such a way that inoculant occupies in two class of separate hoppers.
1 May 2019 in Indian Journal of Science and Technology
Background/ Objective: To design and fabricate an automatic spray coating system that can help in the industries. Handling hazardous chemicals like fluxes in hands is a serious issue in today's manufacturing units. Methods: The study focuses on the early stages and the preliminary design that, how the flux mixture is coated on the aluminium plates with the air atomizer and air blower applications. It also describes about the input feed given by the pneumatic actuator and the serial movement of the work piece in the frame of the setup. Findings: The overview of this paper also bothers about compact design for commuting the circular plates without using the conveyor system, instead by the regular push by the pneumatic actuator at pre defined intervals. Applications: This concept of automation in the flux application is substituting the 30 years of conventional, human operation in the industry.
23 February 2026 in Ocean Engineering