31 January 2022 in Journal of Lightwave Technology
Nowadays, Neural network (NN) has been proved to be an effective solution for nonlinear equalization in short reach optical systems. However, recent research has mainly focused on implementing more powerful NNs for equalization, while ignoring their adaptability to equalization tasks. In this paper, we propose Multi-Symbol Output (MSO)-Neural Networks (NN) for nonlinear equalization in high-speed short reach optical interconnects. The results show that the proposed MSO design works well on Deep Neural Networks (DNN), Long Short-Term Memory neural networks (LSTM) and Gate Recurrent Unit (GRU), which are the recent NN-based equalization structures. By increasing output symbols of the NNs, the number of slide windows in equalization can be sharply reduced, and so the complexity is reduced. By the same time, more information is brought to the MSO-NNs in back-propagations, therefore performance gain achieved. A 212-Gb/s 1-km Pulse Amplitude Modulation (PAM)-4 optical link is experimentally demonstrated as the target system, and the proposed MSO-NN equalizers are used to compare with traditional equalization algorithms including Volterra Nonlinear Equalizer (VNE) and single-symbol output NNs. Experimental results show that MSO design could help reduce the complexity of NN required for nonlinear equalization in the target system by around 2/3, and the proposed MSO-LSTM performs much better than VNE and 1 dB better than SSO-LSTM at the same time. Based on the proposed MSO-LSTM, transmission with BER under HD-FEC over 1 km NZDSF is achieved with a ROP at -2 dBm. Our work is well expandable and the proposed MSO design can be extended to other NN-based equalizers, which can help reduce complexity and learn more info from the training data and gain performance. The proposed MSO-NNs further enhance the performance and reduces the complexity of NN equalizers, provides assurance for future real-time high-speed short-range optical systems, and brings new ideas to NN-based equalizer design.
6 March 2023 in Journal of Lightwave Technology
Terahertz band (0.1 to 10 THz) with high carrier frequency and large available bandwidth has become a promising candidate to meet the 100 Gbit/s or even 1 Tbit/s data rate required by the future six-generation (6G) mobile communication networks. Compared with the all-electrical methods to generate terahertz signals, the photon-assisted technology can break the bottleneck of the bandwidth limit of the electronics devices, and generate the terahertz signal with high frequency, large bandwidth, flexible tunability and easy integration with the large capacity fiber link. In this paper, we introduce the typical methods to generate terahertz signals based on the photon-assisted technology, and review the representative achievements in different areas of terahertz communication, such as the large capacity terahertz transmission, the long distance terahertz transmission, the real-time terahertz communication, and the integrated terahertz sensing and communication. Based on the photon-assisted technology and various key techniques, devices and advanced digital signal processing (DSP) algorithms, we have obtained many great achievements in broadband terahertz communication and sensing, and the experimental setups and results have also been demonstrated in detail.
2 May 2022 in IEEE Photonics Technology Letters
The radio-over-fiber (RoF) orthogonal frequency division multiplexing (OFDM) system at Terahertz (THz) band has been a promising solution to meet the demand for high capacity and flexibility. The signals transmitted in the RoF system will suffer severe impairments caused by the wireless multi-path effect, optical fiber transmission, and photoelectric device response. The time-frequency domain equalization (TFDE) based on the two-dimension convolution (Conv2D) neural network (NN) is proposed to resist the linear and nonlinear impairments of the RoF-OFDM system. Furthermore, complex convolution is applied to compensate for the complex channel response. Compared with several baseline models, the detailed performance improvement and model size discussion of the complex-valued Conv2D NN TFDE are investigated. With the aid of the complex-valued Conv2D NN TFDE, the 16 Gbaud 16-ary quadrature amplitude modulation (16QAM) signals are delivered over 54.6 m wireless distance and 20 km standard single mode fiber. The line rate of this RoF system achieves 53.5 Gbit/s.
27 October 2021 in Journal of Lightwave Technology
Terahertz band has become a promising research field due to its advantages such as high frequency and large available bandwidth. In this paper, we realized the transmission of the 325 GHz 30 Gbaud terahertz quadrature phase shift keying (QPSK) signal with a bit error ratio (BER) less than the 7% hard-decision forward-error-correction (HD-FEC) threshold of 3.8 × 10 −3 , and 325 GHz 16 Gbaud 16-ary quadrature amplitude modulation (16QAM) signal with a BER less than the 20% soft-decision forward-error-correction (SD-FEC) threshold of 2.0 × 10 −2 over 1 m metallic hollow core fiber. In addition, the performances of the metallic hollow core fiber transmission system under different frequencies from 300 to 380 GHz have also been measured. With the help of the Volterra nonlinearity compensation (VNC) algorithm, the highest net transmission rate can be up to 140.625 Gbit/s for 300 GHz 30 Gbaud 64QAM signal with satisfying the 28% spatially coupled low density parity check (SC-LDPC) threshold of 5.2 × 10 −2 . By comparing the performances of the metallic hollow core fiber transmission system and wireless transmission system, we also proved the superiority of the hollow core fiber to transmit terahertz signals. The experimental results show that compared with the commonly used free space transmission, the hollow core fiber can be a promising candidate to transmit high-frequency terahertz signals with a high speed and a low loss, and is worthy of further study in the future.
22 July 2022 in IEEE Transactions on Microwave Theory and Techniques
We experimentally demonstrate the transmission of multiorder quadrature amplitude modulation (QAM) millimeter wave (MMW) orthogonal frequency division (OFDM) signal at 28 GHz radio frequency (RF). To overcome these unfavorable channel properties such as high path loss, propagation loss, rain fading, etc., 5G MMW phased array antenna has been used. Meanwhile, probabilistic shaping (PS) technology is applied to extend transmission distance, and Volterra nonlinearity compensation (VNC) technology is used to alleviate the system nonlinearity. Using 5G MMW phased array antennas and technologies of PS and VNC, 6.72 Gbit/s 1024-QAM OFDM signal at 28 GHz can be transmitted over 55-m wireless distance in our experiment, satisfying the normalized general mutual information (NGMI) threshold of 0.83 with 25% soft-decision forward-error-correction (SD-FEC) overhead. To the best of our knowledge, this is the first time to demonstrate the transmission of multiorder QAM OFDM signal at 28 GHz RF using 5G MMW phased array antenna.
28 February 2023 in Journal of Lightwave Technology
We have implemented a large-capacity, long-haul, and high spectral efficiency photonics-based polarization multiplexing communication system at W-band. The signal delivery up to 119.1 Gb/s with spectral efficiency of 9.9 bit/s/Hz is achieved over a 10 km optic-fiber link and 4600 m wireless link. In our study, we utilize an orthogonal frequency division multiplexing (OFDM) scheme to compensate for the signal impairments caused by the dispersion effect and the wireless multipath effect. Based on a pair of antennas, the antenna polarization multiplexing technique is used to realize the polarization-multiplexed mm-wave signal delivery. Also, only one communication link is required, instead of the complex 2×2 line-of-sight multiple-input multiple-output (MIMO) link. Instead of Cassegrain antennas, the combination of plano-convex lens and horn antenna greatly extends the wireless distance. For increasing the spectral efficiency and throughput of the communication system, we employ higher-order modulation formats, probabilistic shaping (PS) techniques, and a series of equalization algorithms. Based on photonics technology, we have created a record-setting distance-rate product of 547.9 Gb/s•km (119.1 Gb/s × 4.6 km) for an independent channel at W-band.